Precombustion Chambers
Usage:
Remove Precombustion Chambers
start by:
a) remove fuel injection valves
1. Remove the coolant from the engine cooling system.
2. Remove precombustion chamber (1) with tool (A).
Install Precombustion Chambers
1. Install seal (1) and gasket (2) on the precombustion chamber.
2. Put 9M3710 Anti-Seize Compound on the threads of the precombustion chamber and liquid soap on the seal.
3. Install the precombustion chamber in the cylinder head. Tighten chamber to a torque of 225 ± 15 lb. ft. (300 ± 20 N·m) with tool (A).
end by:
a) install fuel injection valves
Caterpillar Information System:
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Lines
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Valves
D353 INDUSTRIAL & MARINE ENGINES Water Temperature Regulators
D353 INDUSTRIAL & MARINE ENGINES Crankshaft Main Bearings
D353 INDUSTRIAL & MARINE ENGINES Oil Pump Drive
D353 INDUSTRIAL & MARINE ENGINES Oil Pan
D353 INDUSTRIAL & MARINE ENGINES Oil Pump
D353 INDUSTRIAL & MARINE ENGINES Piston Cooling Tubes
D353 INDUSTRIAL & MARINE ENGINES Connecting Rod Bearings
D353 INDUSTRIAL & MARINE ENGINES Turbocharger Lubrication Valve
D353 INDUSTRIAL & MARINE ENGINES Oil Filter Base
D353 INDUSTRIAL & MARINE ENGINES Oil Cooler
D353 INDUSTRIAL & MARINE ENGINES Air Cleaner Assembly
D353 INDUSTRIAL & MARINE ENGINES Turbocharger
D353 INDUSTRIAL & MARINE ENGINES Water Manifold
D353 INDUSTRIAL & MARINE ENGINES Aftercooler
D353 INDUSTRIAL & MARINE ENGINES Intake Manifold
D353 INDUSTRIAL & MARINE ENGINES Rocker Shaft Assembly And Push Rods
D353 INDUSTRIAL & MARINE ENGINES Rocker Shaft Assembly
D353 INDUSTRIAL & MARINE ENGINES Cylinder Head Assembly (Earlier)
D353 INDUSTRIAL & MARINE ENGINES Cylinder Head Assembly (Later)
D353 INDUSTRIAL & MARINE ENGINES Spacer Plate
D353 INDUSTRIAL & MARINE ENGINES Valve Lifters
D353 INDUSTRIAL & MARINE ENGINES Valves