Water Temperature Regulators
Usage:
Remove Water Temperature Regulators
1. Disconnect bypass line (3) from regulator housing.
2. Remove bolts (2) and regulator housing (1).
3. Remove regulator (4) from housing (5).
4. Remove seals (6) from housing.
Install Water Temperature Regulators
1. Install seals in housing (1) with tooling (A).
2. Install seals (3) with lip of seal toward plate (4).
3. Install regulators (2) in housing.
4. Install regulator housing (1) on engine.
5. Connect water bypass line to housing.
Caterpillar Information System:
D353 INDUSTRIAL & MARINE ENGINES Crankshaft Main Bearings
D353 INDUSTRIAL & MARINE ENGINES Oil Pump Drive
D353 INDUSTRIAL & MARINE ENGINES Oil Pan
D353 INDUSTRIAL & MARINE ENGINES Oil Pump
D353 INDUSTRIAL & MARINE ENGINES Piston Cooling Tubes
D353 INDUSTRIAL & MARINE ENGINES Connecting Rod Bearings
D353 INDUSTRIAL & MARINE ENGINES Turbocharger Lubrication Valve
D353 INDUSTRIAL & MARINE ENGINES Oil Filter Base
D353 INDUSTRIAL & MARINE ENGINES Oil Cooler
D353 INDUSTRIAL & MARINE ENGINES Water Pump
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Pump, Accessory Drive Housing And Governor
D353 INDUSTRIAL & MARINE ENGINES Accessory Drive Housing
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Valves
D353 INDUSTRIAL & MARINE ENGINES Fuel Injection Lines
D353 INDUSTRIAL & MARINE ENGINES Precombustion Chambers
D353 INDUSTRIAL & MARINE ENGINES Air Cleaner Assembly
D353 INDUSTRIAL & MARINE ENGINES Turbocharger
D353 INDUSTRIAL & MARINE ENGINES Water Manifold
D353 INDUSTRIAL & MARINE ENGINES Aftercooler
D353 INDUSTRIAL & MARINE ENGINES Intake Manifold
D353 INDUSTRIAL & MARINE ENGINES Rocker Shaft Assembly And Push Rods
D353 INDUSTRIAL & MARINE ENGINES Rocker Shaft Assembly
D353 INDUSTRIAL & MARINE ENGINES Cylinder Head Assembly (Earlier)
D353 INDUSTRIAL & MARINE ENGINES Cylinder Head Assembly (Later)