1979/10/29 Caterpillar

New--3208 Engine Maintenance Tips Wall Chart {0374,1000}

Usage:

A 3208 Engine Maintenance Tips Wall Chart is available for fast, easy reference. In short, clear form, the chart gives basic maintenance instructions for the four most important engine systems: lubrication, fuel, cooling and air induction. See Illustration 1. Easy access to this type of information is most important during cold temperatures, so the chart has been specifically made to hang on bulletin boards in customer shops. In addition, the chart is large-15 × 22" (381 × 558 mm), and made of vinyl impregnated paper which makes it grease resistant and tear resistant.

Charts are available in packages of 10 and 50: Form No. SEBU5691-01 is a single chart. It is available in packages of 10, so dealers are encouraged to order in quantities of 10.

Illustration 1. Single SEBU5691-01 Chart.

Illustration 2. SEBU5709 package of 50 in display box.

Form No. SEBU5709 is a package of 50 in a display box (Illustration 2).

The chart is also available in Spanish, Form No. SSBU5691-01.

Caterpillar Information System:

1979/10/22 Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}

1979/10/22 New Shaft Used In Fan Drive Group{1359}

1979/10/22 Steel Shims Are Now Used To Adjust The Preload On The Front Wheel Bearings{4208,4200}

1979/10/22 Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}

1979/10/22 New Connecting Rod Is Tapered In Piston Pin Area{1218}

1979/10/22 New Valve Rotator And New Oil Shield Are Available{1104,1105,1109}

1979/10/22 Size Of Glass Beads Is Important When Used To Clean Engine And Turbocharger Parts{0670,1052,1053,1077,1105,1214}

1979/10/22 More Studs Used To Hold Transmission To Bevel Gear Case{3064,3150,4059}

1979/10/22 Cold Temperature Starting Procedures For Air Compressor And Drill Engines{0374,1000,1450}

1979/10/22 New Coolant Temperature Regulator Housing And Vent Line Valve Give Better Control Of Engine Cooling; Conversion Kits Available{1380,1355}

1979/10/22 Bracket Modification Makes Oil Filter Changes On Transmissions Easier{3179}

1979/10/22 Use The FT1482 Stop Collar Assembly With The 1P4000 Line Boring Tool Group{0663}

1979/10/29 New Top Piston Ring Has Plasma-Coated Face {1215}

1979/10/29 Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}

1979/10/29 New Repair Kit Is Available For Service Of Hydraulic Jack {0642}

1979/11/05 Correct Installation Of Track Shoe Nuts{4170,4179}

1979/11/05 Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}

1979/11/05 Wider Connecting Rods Have More Bearing Area{1214,1218}

1979/11/12 Puller Studs Of Same Size Can Have Different Work Capacities{0621}

1979/11/12 New Air Cleaner Group Keeps Rain Out Of Cleaner{1051,1054}

1979/11/26 More Potting Material Now Used In 6N5906 Electric Service Meter{7480}

1979/11/26 Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}

1979/11/26 New Cylinder Block Has More Material Around Liner Seat Area{1201}

1979/11/26 Former Oil Pump Group Is Now Used Again{1304}