More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
Usage:
All Machines Equipped With 6N5906 Service Meters
Description of Change: More potting material (sealant) is now used in the 6N5906 Service Meter. This potting material will prevent water from getting inside the potentiometer. Formerly, water some times got inside the potentiometer and caused the meter to operate too fast.
Meters with the added potting material have a line before and after the part number on the face of the meter.
Adaptable As: The 6N5906 Meter, with more potting material, is a direct replacement for the original 6N5906 Meter. The part number did not change.
Caterpillar Information System:
1979/11/12 New Air Cleaner Group Keeps Rain Out Of Cleaner{1051,1054}
1979/11/12 Puller Studs Of Same Size Can Have Different Work Capacities{0621}
1979/11/05 Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/05 Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05 Correct Installation Of Track Shoe Nuts{4170,4179}
1979/10/29 New Repair Kit Is Available For Service Of Hydraulic Jack {0642}
1979/10/29 Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29 New Top Piston Ring Has Plasma-Coated Face {1215}
1979/10/29 New--3208 Engine Maintenance Tips Wall Chart {0374,1000}
1979/10/22 Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22 New Shaft Used In Fan Drive Group{1359}
1979/10/22 Steel Shims Are Now Used To Adjust The Preload On The Front Wheel Bearings{4208,4200}
1979/11/26 Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26 New Cylinder Block Has More Material Around Liner Seat Area{1201}
1979/11/26 Former Oil Pump Group Is Now Used Again{1304}
1979/11/26 Fabricated Tester For Regulator-Exciter Control Assemblies Used On SR-4 And SRCR Generators{0652,4451,4452,4454,4467}
1979/12/10 Improved 6V2012 Micrometer Depth Gauge Set Has Increased Range To Permit Deeper Measurement{0653,5070}
1979/12/10 Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10 New Cylinder Heads Are More Rigid And Stronger{1100}
1979/12/10 Moldboard Repair Plates Are Adaptable To Current Machines{6151}
1979/12/10 Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/17 Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17 New Shift Console Uses Three Bolts Instead Of Two For The Manual Switch Mounting Plate{3168,3171}
1979/12/17 Different Cap And Socket For Ball Stud On Circle Drawbar Can Be Used Without Plastic Inserts{6170,6171}