1979/11/05 Caterpillar


Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}

Usage:


All Machines Equipped With Electric Starting Systems And Receptacle Assemblies

Description of Change: Two plug assemblies (booster cables) are now available for starting Caterpillar machines equipped with electric starting systems and receptacle assemblies.

One plug assembly is 15 feet long and has male connections at both ends. This plug assembly permits one machine to boost start another machine if both machines are equipped with receptacle assemblies.

The other plug assembly, which is 10 feet in length, has a male connection at one end and two terminals at the other end. This permits boost starting a machine equipped with a receptacle assembly, with any power source of the correct capacity.

Adaptable To: The two new plug assemblies are adaptable to machines as per the information in the chart.

Caterpillar Information System:

1979/11/05 Correct Installation Of Track Shoe Nuts{4170,4179}
1979/10/29 New Repair Kit Is Available For Service Of Hydraulic Jack {0642}
1979/10/29 Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29 New Top Piston Ring Has Plasma-Coated Face {1215}
1979/10/29 New--3208 Engine Maintenance Tips Wall Chart {0374,1000}
1979/10/22 Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22 New Shaft Used In Fan Drive Group{1359}
1979/10/22 Steel Shims Are Now Used To Adjust The Preload On The Front Wheel Bearings{4208,4200}
1979/10/22 Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22 New Connecting Rod Is Tapered In Piston Pin Area{1218}
1979/10/22 New Valve Rotator And New Oil Shield Are Available{1104,1105,1109}
1979/10/22 Size Of Glass Beads Is Important When Used To Clean Engine And Turbocharger Parts{0670,1052,1053,1077,1105,1214}
1979/11/05 Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/12 Puller Studs Of Same Size Can Have Different Work Capacities{0621}
1979/11/12 New Air Cleaner Group Keeps Rain Out Of Cleaner{1051,1054}
1979/11/26 More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26 Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26 New Cylinder Block Has More Material Around Liner Seat Area{1201}
1979/11/26 Former Oil Pump Group Is Now Used Again{1304}
1979/11/26 Fabricated Tester For Regulator-Exciter Control Assemblies Used On SR-4 And SRCR Generators{0652,4451,4452,4454,4467}
1979/12/10 Improved 6V2012 Micrometer Depth Gauge Set Has Increased Range To Permit Deeper Measurement{0653,5070}
1979/12/10 Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10 New Cylinder Heads Are More Rigid And Stronger{1100}
1979/12/10 Moldboard Repair Plates Are Adaptable To Current Machines{6151}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.