1999/10/01 Caterpillar


Corrections For Operation & Maintenance Manual, SEBU6966-02, "3600 Heavy Fuel Engines" {0374}

Usage:


3606 (8RB),
3608 (6MC),
3612 (9RC),
3616 (1PD) Engines Operating On Heavy Fuel

Table 52, "Approximate Fuel Consumption Before A Major Overhaul", on Page 152 and Table 53, "Approximate Fuel Consumption Before A Top End Overhaul", on Page 155 are not correct. The correct tables follow:

Table 52

Table 53

Caterpillar Information System:

1999/10/01 Revised Maintenance Schedules For 3500 Diesel Commercial Engines {0374,1000}
1999/10/01 Be Sure To Use The Correct Piston Cooling Jet Tube Assembly With Gallery Cooled Pistons {1331}
1999/10/01 New Water Pump Group (Basic) Includes Many Improvements {1361}
1999/09/01 Procedure For Replacing The 124-4596 Exhaust Port Thermocouple And 124-4598 Turbocharger Inlet And Exhaust Thermocouple In The Mounting And Electrical Sensor Groups{7498}
1999/09/01 New Seal Kits Available For Servicing Heat Exchangers{1379}
1999/09/01 New Water Temperature Regulators Used In Temperature Regulator Groups{1355}
1999/09/01 New Connecting Rod Bolt Tightening Procedure{1218}
1999/09/01 New Rod Ends With Increased Temperature Rating Used In Exhaust Bypass Groups{1057}
1999/09/01 Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01 Summary Of Improvements To Deep Sump Oil Pans{1302}
1999/09/01 Service Repair Kits Available For Deltec® Gas Pressure Regulators{1270}
1999/09/01 Improved Woodward EG3P Actuator Assembly Is Available{1264,1265,1716}
1999/10/01 New Method To Determine When To Clean The Aftercooler Core {1064}
1999/10/01 New Lever In Governor Group Provides Improved Control {1265}
1999/10/01 New Bearings In Fuel Injection Control Housing Provide Improved Service Life {1298}
1999/10/01 Hardened Rod End Bearings Provide Improved Reliability {1298}
1999/10/01 Identification Of Compatible Engine Oil Differential Pressure Sensors {1924}
1999/11/01 138-8440 Component Cleaner May Damage Electrical Connectors {0644}
1999/11/01 Download Flash Files By Using The Caterpillar Service Information System (SIS) Or SIS Web {1901,1920}
1999/11/01 Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/11/01 New Optional Two Piece Service Replacement Piston {1214,1331}
1999/11/01 New Fuel Shutoff Solenoids Provide Longer Service Life {7418}
1999/11/01 New Aftercooler Core Assemblies Used In Raw Water Aftercooler Groups {1063}
1999/11/01 Engine Oil Scavenge Pumps Use New Hardened Shaft Assemblies {1312}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.