Improved Woodward EG3P Actuator Assembly Is Available{1264,1265,1716}
Usage:
G3508 (4WD, 9TG),
G3512 (5JD, 7NJ),
G3516 (8LD, 4EK) Engines
Description of Change: An improved Woodward EG3P actuator assembly is available. The new actuator group that uses the improved Woodward EG3P actuator assembly is now Canadian Standards Association (CSA) approved.
Adaptable To: An improved Woodward EG3P 166-4454 Actuator Assembly is available for these engines and is part of the new 174-3083 Actuator Group.
Caterpillar Information System:
1999/09/01 Front Gear Group Changed To Help Keep Oil Pump Adapter Assembly Bolts Tight{1206,1304}
1999/09/01 New Rear Gear Group Available For Use In Landfill Applications{1206}
1999/09/01 Be Sure To Use The Correct Procedure To Remove The Rear Crankshaft Seal And Wear Sleeve{1161}
1999/09/01 New Electronic Control Module For 3408E And 3412E Engines{1901}
1999/09/01 New Gasket Allows Easier Spark Plug Service{1555}
1999/09/01 New Caterpillar Digital Ignition System Provides Improvements Over Magneto Systems{1550,1552}
1999/09/01 Wider Crankshaft Gear Used{1204}
1999/09/01 Engine Control For Dynamometer Or Diagnostic Testing{1000}
1999/09/01 New 173-1530 Injector Seating Tool Group Available{0710,1290}
1999/08/01 New Governor Control (Load Share Module) For Generator Set Engines{7490}
1999/08/01 Several New Service Manuals and Revised Service Manual Modules Available{0374,1000}
1999/08/01 Troubleshooting Hard Starting{1250}
1999/09/01 Service Repair Kits Available For Deltec® Gas Pressure Regulators{1270}
1999/09/01 Summary Of Improvements To Deep Sump Oil Pans{1302}
1999/09/01 Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01 New Rod Ends With Increased Temperature Rating Used In Exhaust Bypass Groups{1057}
1999/09/01 New Connecting Rod Bolt Tightening Procedure{1218}
1999/09/01 New Water Temperature Regulators Used In Temperature Regulator Groups{1355}
1999/09/01 New Seal Kits Available For Servicing Heat Exchangers{1379}
1999/09/01 Procedure For Replacing The 124-4596 Exhaust Port Thermocouple And 124-4598 Turbocharger Inlet And Exhaust Thermocouple In The Mounting And Electrical Sensor Groups{7498}
1999/10/01 New Water Pump Group (Basic) Includes Many Improvements {1361}
1999/10/01 Be Sure To Use The Correct Piston Cooling Jet Tube Assembly With Gallery Cooled Pistons {1331}
1999/10/01 Revised Maintenance Schedules For 3500 Diesel Commercial Engines {0374,1000}
1999/10/01 Corrections For Operation & Maintenance Manual, SEBU6966-02, "3600 Heavy Fuel Engines" {0374}