1984/08/20 Caterpillar


New Thermistor Thermometer Group Can Be Ordered At Less Cost{0651,0653,0650}

Usage:


Description of Change: A new thermistor thermometer group is available. It is the same as the former group except it is packaged differently. Thus, the new group costs less than the former group.

Adaptable As: The new 8T470 Thermistor Thermometer Group is a direct replacement for the former 9S9102 Thermistor Thermometer Group, which is canceled. See Special Instruction, Form SEHS8446 for the operating instructions of this new group.

Caterpillar Information System:

1984/08/20 Install Dampers And Check Stud Alignment After Radiators Are Rebuilt{1353,1381}
1984/08/13 New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13 New Lock Pin Used In Nitrogen Actuator Assembly{7401}
1984/08/13 Checking And Adjusting Travel Drift{5058,5063}
1984/08/13 New Films (Decals) Available For Service Meter Face{7478,7480}
1984/08/13 New Service Tools Available{0600}
1984/08/13 New Pipe Nipple Used In Fire Suppression Cylinder And Valve Group{7401}
1984/07/16 Lubricate Door Latches To Help Prevent Wear{7300,7308}
1984/07/16 Installation Instructions For Turbocharger Bearing Kit{1052,1053}
1984/07/16 New Plate Assembly Used In Bottom Guard Group{7153}
1984/07/16 Temporary Control Support Group For Machine Maintenance Is Available As A Service Tool{7253}
1984/07/16 Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0768,1361}
1984/08/20 New Air Dryer Group Used{4285}
1984/09/03 New Inlet Valve Used{1105}
1984/09/03 O-Ring Seals For Steering Hand Metering Pump Groups Available For Parts Service{4312,4300}
1984/09/03 Specifications And Rack Adjustment For Variable Horsepower Fuel Systems{1251,1257,1250}
1984/09/03 Improved Service And Parking Brake Groups Have More Bolts{4267,4251,4250}
1984/09/03 Use Of Teflon Sealant Makes It Easier To Replace Water Heater Elements{1383}
1984/09/03 Low Maintenance High Output Batteries Are Now Standard Equipment{1401}
1984/09/03 Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/10 The 6V4050 Transmission Shift Analyzer Will Help Quickly Isolate Shifting Problems{0785,3168}
1984/09/10 Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10 New Hardware Is Used To Hold Mirrors In Position{7319}
1984/09/17 New Service Tools Available{0600}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.