New Plate Assembly Used In Bottom Guard Group{7153}
Usage:
966D Loaders, 814B Tractors, 815B Compactors
Description of Change: A new plate assembly is used in the power train guard group for the above machines. The new plate assembly is made from stronger steel, is deeper and has more reinforcement than the former plate assembly. These improvements will help prevent rocks from damaging the plate assembly, which can also result in damage to the transfer gear case.
Adaptable As: The new 6W153 Plate Assembly is a direct replacement for the former 8V2846 Plate Assembly when used as shown in the chart.
Also order 170 cm (67") of 5P4690 Seal for 814B Tractors and 815B Compactors equipped with sound suppression.
Caterpillar Information System:
1984/07/16 Temporary Control Support Group For Machine Maintenance Is Available As A Service Tool{7253}
1984/07/16 Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0768,1361}
1984/07/16 FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16 New Mechanical Service Meter Used{7478}
1984/07/16 Toric Ring Seals Available For Duo-Cone Seals In Service And Parking Brake Group{4208,4250}
1984/07/16 Use Caution When Handling Components That Contain Asbestos{0353}
1984/07/16 Alternator Available For General Use{1405}
1984/07/16 New Relief Valve Guide Used In Oil Pump{1315}
1984/07/09 Modifications Can Be Made To Improve Distribution Of Exhaust Through The Truck Dump Body Ribs{7258,1059,1061,1062}
1984/07/09 New Disassembly And Assembly Tools Available For Fuel Ratio Controls{0600,1278}
1984/07/02 Testing For Leaks In Oil Coolers With Removable Cores{1365,1366}
1984/07/02 Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/16 Installation Instructions For Turbocharger Bearing Kit{1052,1053}
1984/07/16 Lubricate Door Latches To Help Prevent Wear{7300,7308}
1984/08/13 New Pipe Nipple Used In Fire Suppression Cylinder And Valve Group{7401}
1984/08/13 New Service Tools Available{0600}
1984/08/13 New Films (Decals) Available For Service Meter Face{7478,7480}
1984/08/13 Checking And Adjusting Travel Drift{5058,5063}
1984/08/13 New Lock Pin Used In Nitrogen Actuator Assembly{7401}
1984/08/13 New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/20 Install Dampers And Check Stud Alignment After Radiators Are Rebuilt{1353,1381}
1984/08/20 New Thermistor Thermometer Group Can Be Ordered At Less Cost{0651,0653,0650}
1984/08/20 New Air Dryer Group Used{4285}
1984/09/03 New Inlet Valve Used{1105}