1984/07/16 Caterpillar


Temporary Control Support Group For Machine Maintenance Is Available As A Service Tool{7253}

Usage:


966D Loaders ( 99Y2883-Up );
814B Tractors ( 16Z264-Up );
815B ( 17Z464-Up ),
816B ( 15Z363-Up ) Compactors

Description of Change: A temporary control support group is now available as a service tool for the above machines. The group is used during maintenance to support the steering column when the cab is removed. When the support group is installed, the machine can be operated with the cab removed.

The temporary control group will no longer be shipped with the machines.

Adaptable To: The 2V4252 Temporary Control Group must be ordered as a service tool for use on the above machines.

Caterpillar Information System:

1984/07/16 Use Vacuum Tester For Quality Control Check Of Water Pump Seal{0768,1361}
1984/07/16 FT1886 Valve Spring Compressor Group Available{0600,1108}
1984/07/16 New Mechanical Service Meter Used{7478}
1984/07/16 Toric Ring Seals Available For Duo-Cone Seals In Service And Parking Brake Group{4208,4250}
1984/07/16 Use Caution When Handling Components That Contain Asbestos{0353}
1984/07/16 Alternator Available For General Use{1405}
1984/07/16 New Relief Valve Guide Used In Oil Pump{1315}
1984/07/09 Modifications Can Be Made To Improve Distribution Of Exhaust Through The Truck Dump Body Ribs{7258,1059,1061,1062}
1984/07/09 New Disassembly And Assembly Tools Available For Fuel Ratio Controls{0600,1278}
1984/07/02 Testing For Leaks In Oil Coolers With Removable Cores{1365,1366}
1984/07/02 Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/02 New Seals Help Prevent Leakage In Axial Piston (Slipper) Pumps And Motors{3201,3203,4351,5058,5070}
1984/07/16 New Plate Assembly Used In Bottom Guard Group{7153}
1984/07/16 Installation Instructions For Turbocharger Bearing Kit{1052,1053}
1984/07/16 Lubricate Door Latches To Help Prevent Wear{7300,7308}
1984/08/13 New Pipe Nipple Used In Fire Suppression Cylinder And Valve Group{7401}
1984/08/13 New Service Tools Available{0600}
1984/08/13 New Films (Decals) Available For Service Meter Face{7478,7480}
1984/08/13 Checking And Adjusting Travel Drift{5058,5063}
1984/08/13 New Lock Pin Used In Nitrogen Actuator Assembly{7401}
1984/08/13 New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/20 Install Dampers And Check Stud Alignment After Radiators Are Rebuilt{1353,1381}
1984/08/20 New Thermistor Thermometer Group Can Be Ordered At Less Cost{0651,0653,0650}
1984/08/20 New Air Dryer Group Used{4285}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.