1984/09/03 Caterpillar


Low Maintenance High Output Batteries Are Now Standard Equipment{1401}

Usage:


All Machines With Batteries

SUPPLEMENT: 02/18/85

SERVICE MAGAZINE, SEPTEMBER 3, 1984, PAGE 10. The article "Low Maintenance High Output Batteries Are Now Standard Equipment", contains battery part numbers that are not available as parts service replacements. Put a mark through that article and make reference to the article with a similar title in this issue.

--------------- END SUPPLEMENT ---------------

Low maintenance high output batteries are now standard equipment on all machines shipped from the factory. The low maintenance high output (LMHO) batteries require less service than conventional batteries. The service interval for battery maintenance has been extended from 100 hours (conventional batteries) to 200 hours (low maintenance high output batteries). Low maintenance high output batteries are available for parts service as shown in the chart.

Use the following chart to match battery size to engine model and to determine the appropriate attachment battery (if available).

Caterpillar Information System:

1984/09/03 Use Of Teflon Sealant Makes It Easier To Replace Water Heater Elements{1383}
1984/09/03 Improved Service And Parking Brake Groups Have More Bolts{4267,4251,4250}
1984/09/03 Specifications And Rack Adjustment For Variable Horsepower Fuel Systems{1251,1257,1250}
1984/09/03 O-Ring Seals For Steering Hand Metering Pump Groups Available For Parts Service{4312,4300}
1984/09/03 New Inlet Valve Used{1105}
1984/08/20 New Air Dryer Group Used{4285}
1984/08/20 New Thermistor Thermometer Group Can Be Ordered At Less Cost{0651,0653,0650}
1984/08/20 Install Dampers And Check Stud Alignment After Radiators Are Rebuilt{1353,1381}
1984/08/13 New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13 New Lock Pin Used In Nitrogen Actuator Assembly{7401}
1984/08/13 Checking And Adjusting Travel Drift{5058,5063}
1984/08/13 New Films (Decals) Available For Service Meter Face{7478,7480}
1984/09/03 Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/10 The 6V4050 Transmission Shift Analyzer Will Help Quickly Isolate Shifting Problems{0785,3168}
1984/09/10 Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10 New Hardware Is Used To Hold Mirrors In Position{7319}
1984/09/17 New Service Tools Available{0600}
1984/09/17 Replacement Circle Guide Shoes And Bronze Alloy Wear Strips Available For Parts Service{6150,6154,6155}
1984/09/17 New Gauge In The 1P545 (Tire) Gauge Group Has Dual Scales [kPa (psi)]{0600}
1984/09/17 Correct Installation Of Fuel Injection Pumps Can Prevent Fuel Leaks{1251,1253}
1984/09/17 Exhaust Heating Of Additional Areas Of The Body{7258}
1984/10/01 Correct Use Of The 6V4141 Sleeve Metering Calibration Tool Group{0600,0766,0778}
1984/10/01 Drive Shaft Restraint Added To Drive Shaft Guard Group{3253}
1984/10/01 Tool Drawings Available For Testing Altronic Magnetos On 2P2340 Magneto Test Bench{0709,0712,0767}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.