1984/09/03 Caterpillar


O-Ring Seals For Steering Hand Metering Pump Groups Available For Parts Service{4312,4300}

Usage:


768C, 772B, 776 Tractors;
769C, 773B, 777 Trucks

The 3G1209 O-Ring Seal used in the steering hand metering pumps of the above machines is now serviced. The part numbers of the steering hand metering pump groups are shown in the chart.


Location of the 3G1209 O-Ring Seal.

Caterpillar Information System:

1984/09/03 New Inlet Valve Used{1105}
1984/08/20 New Air Dryer Group Used{4285}
1984/08/20 New Thermistor Thermometer Group Can Be Ordered At Less Cost{0651,0653,0650}
1984/08/20 Install Dampers And Check Stud Alignment After Radiators Are Rebuilt{1353,1381}
1984/08/13 New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13 New Lock Pin Used In Nitrogen Actuator Assembly{7401}
1984/08/13 Checking And Adjusting Travel Drift{5058,5063}
1984/08/13 New Films (Decals) Available For Service Meter Face{7478,7480}
1984/08/13 New Service Tools Available{0600}
1984/08/13 New Pipe Nipple Used In Fire Suppression Cylinder And Valve Group{7401}
1984/07/16 Lubricate Door Latches To Help Prevent Wear{7300,7308}
1984/07/16 Installation Instructions For Turbocharger Bearing Kit{1052,1053}
1984/09/03 Specifications And Rack Adjustment For Variable Horsepower Fuel Systems{1251,1257,1250}
1984/09/03 Improved Service And Parking Brake Groups Have More Bolts{4267,4251,4250}
1984/09/03 Use Of Teflon Sealant Makes It Easier To Replace Water Heater Elements{1383}
1984/09/03 Low Maintenance High Output Batteries Are Now Standard Equipment{1401}
1984/09/03 Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/10 The 6V4050 Transmission Shift Analyzer Will Help Quickly Isolate Shifting Problems{0785,3168}
1984/09/10 Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10 New Hardware Is Used To Hold Mirrors In Position{7319}
1984/09/17 New Service Tools Available{0600}
1984/09/17 Replacement Circle Guide Shoes And Bronze Alloy Wear Strips Available For Parts Service{6150,6154,6155}
1984/09/17 New Gauge In The 1P545 (Tire) Gauge Group Has Dual Scales [kPa (psi)]{0600}
1984/09/17 Correct Installation Of Fuel Injection Pumps Can Prevent Fuel Leaks{1251,1253}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.