Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
Usage:
All 1100 And 3100 Series And 3204 And 3208 Engines
Tune-up kits and remanufactured nozzles are now available for the above engines. The tune-up kits include the parts shown in Chart B, when applicable. The remanufactured nozzles are specifically designed for Caterpillar engines to provide maximum fuel efficiency and performance. The remanufactured nozzles have the same warranty as new nozzles.
The part numbers of the tune-up kits and remanufactured nozzles are shown in Chart A. Use the Numerical Parts Record (NPR) for the model usage of the nozzles and tune-up kits.
Caterpillar Information System:
1984/09/03 Low Maintenance High Output Batteries Are Now Standard Equipment{1401}
1984/09/03 Use Of Teflon Sealant Makes It Easier To Replace Water Heater Elements{1383}
1984/09/03 Improved Service And Parking Brake Groups Have More Bolts{4267,4251,4250}
1984/09/03 Specifications And Rack Adjustment For Variable Horsepower Fuel Systems{1251,1257,1250}
1984/09/03 O-Ring Seals For Steering Hand Metering Pump Groups Available For Parts Service{4312,4300}
1984/09/03 New Inlet Valve Used{1105}
1984/08/20 New Air Dryer Group Used{4285}
1984/08/20 New Thermistor Thermometer Group Can Be Ordered At Less Cost{0651,0653,0650}
1984/08/20 Install Dampers And Check Stud Alignment After Radiators Are Rebuilt{1353,1381}
1984/08/13 New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13 New Lock Pin Used In Nitrogen Actuator Assembly{7401}
1984/08/13 Checking And Adjusting Travel Drift{5058,5063}
1984/09/10 The 6V4050 Transmission Shift Analyzer Will Help Quickly Isolate Shifting Problems{0785,3168}
1984/09/10 Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10 New Hardware Is Used To Hold Mirrors In Position{7319}
1984/09/17 New Service Tools Available{0600}
1984/09/17 Replacement Circle Guide Shoes And Bronze Alloy Wear Strips Available For Parts Service{6150,6154,6155}
1984/09/17 New Gauge In The 1P545 (Tire) Gauge Group Has Dual Scales [kPa (psi)]{0600}
1984/09/17 Correct Installation Of Fuel Injection Pumps Can Prevent Fuel Leaks{1251,1253}
1984/09/17 Exhaust Heating Of Additional Areas Of The Body{7258}
1984/10/01 Correct Use Of The 6V4141 Sleeve Metering Calibration Tool Group{0600,0766,0778}
1984/10/01 Drive Shaft Restraint Added To Drive Shaft Guard Group{3253}
1984/10/01 Tool Drawings Available For Testing Altronic Magnetos On 2P2340 Magneto Test Bench{0709,0712,0767}
1984/10/01 Vent Window Repair Kits Available{7310}