1984/09/03 Caterpillar


Use Of Teflon Sealant Makes It Easier To Replace Water Heater Elements{1383}

Usage:


D330C, D333C, D348, D349, D353, D379, D398, D399, 3304, 3306, 3406, 3408, 3412, 3512, 3516 Industrial Engines;
3512, 3516 Marine Engines;
D379, D398, D399, 3512, 3516 Generator Set Engines Equipped With 5N5739 Or 5N5740 Electric Water Heaters

Teflon sealant is now used on the threads of the element assemblies in 5N5739 or 5N5740 Electric Water Heaters. This Teflon sealant will make removal of the element assemblies easier. Formerly, because of corrosion in the threads, it was difficult to remove the element assemblies.

Whenever an element assembly is installed, put 5P3413 Pipe Sealant (with Teflon) on the threads of the element assembly.

Caterpillar Information System:

1984/09/03 Improved Service And Parking Brake Groups Have More Bolts{4267,4251,4250}
1984/09/03 Specifications And Rack Adjustment For Variable Horsepower Fuel Systems{1251,1257,1250}
1984/09/03 O-Ring Seals For Steering Hand Metering Pump Groups Available For Parts Service{4312,4300}
1984/09/03 New Inlet Valve Used{1105}
1984/08/20 New Air Dryer Group Used{4285}
1984/08/20 New Thermistor Thermometer Group Can Be Ordered At Less Cost{0651,0653,0650}
1984/08/20 Install Dampers And Check Stud Alignment After Radiators Are Rebuilt{1353,1381}
1984/08/13 New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13 New Lock Pin Used In Nitrogen Actuator Assembly{7401}
1984/08/13 Checking And Adjusting Travel Drift{5058,5063}
1984/08/13 New Films (Decals) Available For Service Meter Face{7478,7480}
1984/08/13 New Service Tools Available{0600}
1984/09/03 Low Maintenance High Output Batteries Are Now Standard Equipment{1401}
1984/09/03 Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/10 The 6V4050 Transmission Shift Analyzer Will Help Quickly Isolate Shifting Problems{0785,3168}
1984/09/10 Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10 New Hardware Is Used To Hold Mirrors In Position{7319}
1984/09/17 New Service Tools Available{0600}
1984/09/17 Replacement Circle Guide Shoes And Bronze Alloy Wear Strips Available For Parts Service{6150,6154,6155}
1984/09/17 New Gauge In The 1P545 (Tire) Gauge Group Has Dual Scales [kPa (psi)]{0600}
1984/09/17 Correct Installation Of Fuel Injection Pumps Can Prevent Fuel Leaks{1251,1253}
1984/09/17 Exhaust Heating Of Additional Areas Of The Body{7258}
1984/10/01 Correct Use Of The 6V4141 Sleeve Metering Calibration Tool Group{0600,0766,0778}
1984/10/01 Drive Shaft Restraint Added To Drive Shaft Guard Group{3253}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.