Use 2P2333 Manifold Sealer On Exhaust Manifold Slip Joints (Junction) During Assembly{1059}
Usage:
All 5.4"
Bore-60°
V Engines With Slip Joint Exhaust Manifold Sections
When exhaust manifold sections of the slip-joint design are assembled a thin application of 2P2333 Manifold Sealer must be used on the joints to prevent exhaust gas leakage. The sealer must be put on the male ends of each manifold section. Make sure the sealant does not get on the inside of an exhaust manifold section.
Do not use manifold sealers on couplings which use expander ring joints.
Caterpillar Information System:
1981/01/26 Use Scheduled Oil Sampling To Find Change Intervals For Hydraulic Oil{5068}
1981/01/26 Washers Added To Prevent Broken Bolts In Stabilizer Rod Joints (Connections) On Rear Axle Housing{3260,3268}
1981/01/26 6V3150 Engine Pressure Group And 6V3121 Multitach Group Are Available For Testing Engines{0650,1000}
1981/01/26 Improved Tach Drive Adapter Has Step In Shaft To Keep Coupling Engaged{0651,0653}
1981/01/26 Ways To Prevent Damage To Spark Ignited Industrial Engines When Hydrogen Sulfide Is Present In The Fuel{1000,1280,1318,1350}
1981/01/19 Be Sure You Assemble The Turbocharger Lubrication Valve Correctly{1309,1052,1300}
1981/01/19 Green Dye (Color) Added To Transmission Oil For Easier Identification Of Leaks{3004,3067,3179}
1981/01/19 New Sure Seal Electrical Connectors Used In Electrical Wiring Harnesses; Use 6V3000 Seal Repair Kit To Repair Sure Seal Electrical Connectors{0611,1408}
1981/01/19 Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19 6V3141 And 6V3142 Puller Plates Available For Removal Of Tube And Gland From Front Suspension Groups{7201,0621}
1981/01/19 Thicker Layer Of Chrome Now Used On Governor Spring Guide To Extend Its Service Life{1264}
1981/01/19 New Puller Tools Available For Removal Of Steering Cylinder Pin{0621,4303,7058}
1981/02/02 6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02 Changes Made To Exhaust Manifold Group And Cylinder Head Group{1059,1101}
1981/02/02 New Exhaust Manifold Has Slip-Joint Connections{1059,1061}
1981/02/02 New, One-Piece Valve Lifter Used{1209}
1981/02/02 Corrected "5.4" 60°V Main Bearing Selection Guide" Is Now Available{0374,1203,1202}
1981/02/02 Aluminum Identification Plate No Longer Used On Torque Converters; Identification Numbers Put Directly On Converter Housing{3101}
1981/02/02 Elbow With Orifice Now Used In Regulator And Housing Groups For Cooling Systems{1355,1361}
1981/02/02 New Camshaft Has Improved Profile (Shape) Of Exhaust Cam To Extend Service Life{1210}
1981/02/09 Slip Clutches Now Available On Circle Drive Group{5058,5237,5207,6154}
1981/02/16 New Publication: Engine Bearings And Crankshafts{0374}
1981/02/16 Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1981/02/23 Conversion Of Earlier Machines To Use Water-Cooled Aftercoolers{1063}