Two Thinner Spacers Available For Use During Adjustment Of Off-Engine Timing Dimension{1251,0653}
Usage:
D330 And D333 Industrial And Marine Engines
During adjustment of the off-engine timing dimension for scroll fuel systems used on D330 and D333 Industrial and Marine Engines, spacers are removed and added to get the correct dimension. Two new, thinner spacers are available for this purpose.
The 9N6495 Spacer is 4.11 mm (.162") thick, and the 9N6496 Spacer is 4.22 mm (.166") thick.
Add these part numbers and thickness dimensions to the chart, "Spacers And Lifters For Timing Dimension Setting," on page 19 of "Checking Off-Engine Timing Dimension Setting With 5P6600 Timing Fixture Group," Special Instruction, Form No. SMHS7130-02.
Caterpillar Information System:
1980/11/17 Coolant Conditioner Elements Are Now Available For 3208 Engines{1350}
1980/11/17 Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed{1315,1302}
1980/11/10 Wrong Installation Of Washers Between Bearing Cone And Bearing Retainer Nut Can Cause Directional Clutch Damage{3155,3159,3176}
1980/11/10 Different Caps And Adapters For Ball Studs On Circle Drawbars Can Be Used Without Plastic Inserts{6170,6171}
1980/11/10 6V3147 Main Bearing Wrench Now Available{1203,0612}
1980/11/10 Valve Assembly And Nipple Moved From Centershift Lock Control Group To Brake Control Group To Prevent Unauthorized Operation{4282,4267,5220,5221,5223,6151}
1980/11/10 Double-Check Those Dimensions{0374}
1980/11/03 Recommendations For Replacement Of Tandem Drive Chains{4063}
1980/11/03 Spider And Bearing Assembly Must Be Correctly Installed In Drive Shaft-To-Power Control Box Universal Joint{5234,5204,5201}
1980/11/03 FT1523 Fuel Oil System With External Filter Is Available{0652}
1980/11/03 Two Replacement Lights Available For 5P7277 Voltage Tester{0651}
1980/11/03 Adjustable Sequence Valve Permits Better Winch Operation According To The Job{5166,5168,5173,5163}
1980/11/17 6V4021 Piston Ring Compressor Group Available{1215,1214,0622}
1980/11/17 New Exhaust Manifold Group And Air Lines Group Used To Prevent Exhaust Leakage{1059,1061}
1980/11/17 Use Dust Cap To Prevent Freon Leakage From Air Conditioner; Cap Is Available As Replacement Part{7320}
1980/11/17 Some Remanufactured 3406 Engines Have The Wrong Reference Serial Number On The Identification Plate{7557,1000}
1980/11/24 New Aftercooler Core Has Copper-Nickel Tubes For Increased Strength{1063,1064}
1980/11/24 Replacement Wheel Available For Service Of 6V97 Engine Stand Group{0626}
1980/12/01 Direct Inquiry Service Information Retrieval System (SIRS) Available To U.S. And Canadian Dealers{0374}
1980/12/01 Exhaust Manifold And Air Lines Groups Changed To Prevent Exhaust Leakage And Damage To Manifold Gaskets And Mounting Studs{1059,1061}
1980/12/01 Larger Plug Used In The Ends Of The Rocker Arm Shaft Assembly{1102}
1980/12/01 New Service Handle Kit Permits Cab Door To Be Opened From Inside While Locked (Fastened With Lock){7308,7301}
1980/12/01 Check Alignment Of Engine Flywheel And Torque Converter Input Shaft After Flexible Coupling Failures; Also Check Low Idle RPM{3252,1156,3101}
1980/12/01 Warning: Use Correct Seal On Seat Assembly For Valve Group In Steering Valve Group{4307,4312,4322}