R1700G LH.D. MACHINE SYSTEMS Caterpillar

Start By:

a. Remove the steering neutralizer valve. Refer to Disassembly and Assembly, "Steering Neutralizer Valve - Remove" for the machine that is being serviced

NOTE: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.

1. Remove boot (1) from valve body (2).

2. Remove plug (3) and O-ring seal (4).

3. Remove spring (5) and valve spool (6) from the valve body.

4. Remove bolt (7), the lockwasher and the washer from the spool.

5. Remove plug (11) and O-ring seal (10).

6. Remove spring (9) and ball (8) from the valve body.

7. Remove lip seal (12) from the valve body.