Usage:
27Oct2010 |
(Revised 08Nov2010) |
Before/After | PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION FILTER BYPASS SPRINGS ON CERTAIN 120M, 12M, 140M, 14M, 160M AND 16M MOTOR GRADERS |
|
3004 | PS43182 |
NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS43182" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
NOTE: | This Revised Service Letter replaces the 27Oct2010 Service Letter. Changes have been made to the Title, Problem, Affected Product and Service Claim Allowances. |
TERMINATION DATE |
31Oct2012 |
PROBLEM
On certain 120M, 12M, 140M, 14M, 160M and 16M Motor Graders, the existing transmission filter bypass springs can allow filtration bypass under certain operating conditions. |
AFFECTED PRODUCT
Model | Identification Number |
120M | B9C00130-00445 B9N00130-00253 B9W00100-00178 D9W00100-00123 |
12M | B9F00012-00600 B9R00012-00142 |
140M | B9D00125-01873 B9G00100-00178 B9M00125-00724 D9G00100-00155 |
14M | B9J00105-00922 |
160M | B9E00115-00343 B9L00115-00120, 150-408 B9T00100-00125 D9T00100-00109 |
16M | B9H00100-00568 |
PARTS NEEDED
Qty |
Part Number | Description |
1 | 5P7815 | SEAL-O-RING |
1 | 3342679 | SPRING |
1 | 3342680 | SPRING |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 12% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
ACTION REQUIRED
At the next transmission filter change, replace the existing filter bypass springs with the new 334-2679 and 334-2680 Bypass Springs. Refer to Service Magazine SEPD1082. See the article titled "Enhancements to the Filtration System on the Drive Train Systems for Certain Caterpillar Products." While the system is disassembled for the spring change, please verify that the correct Oil Filter Element, 328-3655, is installed and if it is not replace the Oil Filter Element with the correct 328-3655 element. |
SERVICE CLAIM ALLOWANCES
0-72 mo |
NOTE: This is a 1.0-hour job | ||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |