1996/05/09 Caterpillar


New Extension For Electronic Ignition System (EIS) Transformer Groups{1409}

Usage:


G3508 (4WD, 9TG),
G3512 (5JD, 7NJ),
G3516 (8LD, 4EK, 5PN) Commercial Engines

Description of Change: A new extension is being used within the Transformer Assembly to ensure that the Transformer Spacer can freely rotate.

Adaptable To: The new 133-5078 Extension is a direct replacement for the former 127-8895 Extension. The new extension is a component of the 124-0749 Transformer Group and the 125-0517 Transformer Repair Kit.


Illustration of 124-0749 Transformer Group, the 4P-6939 Spacer (1) and the new 133-5078 Extention (2).

Caterpillar Information System:

1996/05/09 New Integral Seal In Water Lines Groups Helps Prevent Coolant Leaks{1380}
1996/05/09 Oil Drainback Holes Changed In New Piston Crown{1225}
1996/05/09 New Components In Camshaft Groups Provide Increased Lubrication To Thrust Washer Assembly{1210}
1996/05/09 New Stronger Cylinder Head Bolts Used{1100}
1996/05/09 Torque Check Necessary For Front Support Bracket Bolts When Damper And Pulley Are Removed{1153}
1996/05/09 Radiators Made With Improved Brass Composition To Add Strength At Crimp Joint{1353}
1996/04/15 Check Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{0706,0774,0782}
1996/04/15 Repair Kits Available For Prelube Pump Groups{1319}
1996/04/15 Remanufactured Cylinder Head Groups Available{1100}
1996/04/15 Engine Configuration And Monitoring System Parameter Programming At Initial Startup{1900,1901}
1996/04/15 New Stainless Steel Plate Prevents Formation Of Rust Within Air Inlet And Exhaust System{1063}
1996/04/15 New Gasket Kits Available{1052,1059,1063,1100,1150,1201,1216,1304,1361,1378,1380}
1996/05/09 New High Temperature Resistant Seal Group And O-Ring Seal Used In Water Pump Groups{1361}
1996/05/09 Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09 New Software For The Customer Communication Module{1926}
1996/05/09 New Programmable Logic Control With In-Phase Monitor For Contactor Type Automatic Transfer Switches{4469}
1996/06/12 Check Cooling System If Exhaust Manifold Or Cylinder Head Gasket Is Damaged{1350}
1996/06/12 Part Number And Application Guide For Oil, Fuel And Transmission Pressure Senders And Water Temperature Senders{1924}
1996/06/12 Troubleshooting Information{7569}
1996/06/12 Formed Rubber Hose Replaces Cast Iron Elbow In Radiator Groups; Be Sure To Use The Correct Water Temperature Regulator{1353}
1996/06/12 Be Sure To Use Correct Stainless Steel Sleeve In Exhaust Ports{1059}
1996/06/12 Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/12 New Woodward Governor PSG Groups Improve Engine Stabability{1264,1265}
1996/06/12 New O-Ring Seal Improves Engine Initial Combustion Gas Sealing{1290}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.