Be Sure To Use Correct Stainless Steel Sleeve In Exhaust Ports{1059}
Usage:
3406E (6BR) Industrial Engines
The above engines have stainless steel sleeves in their exhaust ports.
NOTE: It is recommended that the stainless steel sleeves in the exhaust ports be replaced at overhaul.
The 101-6706 Sleeves are 60.4 mm (2.38 in) in length and the diameter is 47.6 mm (1.87 in). The 101-6706 Sleeve is used in the 3406E (6BR) Industrial Engines.
Caterpillar Information System:
1996/06/12 Formed Rubber Hose Replaces Cast Iron Elbow In Radiator Groups; Be Sure To Use The Correct Water Temperature Regulator{1353}
1996/06/12 Troubleshooting Information{7569}
1996/06/12 Part Number And Application Guide For Oil, Fuel And Transmission Pressure Senders And Water Temperature Senders{1924}
1996/06/12 Check Cooling System If Exhaust Manifold Or Cylinder Head Gasket Is Damaged{1350}
1996/05/09 New Programmable Logic Control With In-Phase Monitor For Contactor Type Automatic Transfer Switches{4469}
1996/05/09 New Software For The Customer Communication Module{1926}
1996/05/09 Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09 New High Temperature Resistant Seal Group And O-Ring Seal Used In Water Pump Groups{1361}
1996/05/09 New Extension For Electronic Ignition System (EIS) Transformer Groups{1409}
1996/05/09 New Integral Seal In Water Lines Groups Helps Prevent Coolant Leaks{1380}
1996/05/09 Oil Drainback Holes Changed In New Piston Crown{1225}
1996/05/09 New Components In Camshaft Groups Provide Increased Lubrication To Thrust Washer Assembly{1210}
1996/06/12 Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/12 New Woodward Governor PSG Groups Improve Engine Stabability{1264,1265}
1996/06/12 New O-Ring Seal Improves Engine Initial Combustion Gas Sealing{1290}
1996/06/12 Incorrect Full Torque Setting Values Displayed On Engine Information Tags{1901}
1996/06/12 New Personality Modules For 3412 Generator Set Engines{1902}
1996/06/12 Higher Capacity Oil Pump Used{1304}
1996/06/12 Selection Of Service Harness For Engines With Electronic Ignition System{1408}
1996/06/12 New Part Kits Available For SR4B Generators{4469}
1996/06/12 Start-Up Procedure After Rebuild{1000}
1996/06/12 Turbocharger Nozzle Cleaning{1052}
1996/06/12 Improvements To Check Valve Within Prechamber Group Reduce Maintenance Schedule{1106}
1996/06/12 New Components In Accessory Drive Group And Alternator Drive Group Provide Improved Serviceability And Help Prevent Oil Leaks{1207,1425}