1996/04/15 Caterpillar


Remanufactured Cylinder Head Groups Available{1100}

Usage:


G3606 (3XF),
G3608 (4WF),
G3612 (1YG),
G3616 (4CG) Engines

Two new remanufactured cylinder head groups provide service repair options for these gas engines. The new standard 0R-4687 Remanufactured Cylinder Head Group and the new 0R-4905 Upgrade To New Remanufactured Cylinder Head Group are available.

Caterpillar Information System:

1996/04/15 Engine Configuration And Monitoring System Parameter Programming At Initial Startup{1900,1901}
1996/04/15 New Stainless Steel Plate Prevents Formation Of Rust Within Air Inlet And Exhaust System{1063}
1996/04/15 New Gasket Kits Available{1052,1059,1063,1100,1150,1201,1216,1304,1361,1378,1380}
1996/04/15 129-0372 Primary Fuel Filter/Water Separator Assembly{1260,1263}
1996/04/15 New Gasket For Engines With Water Cooled Exhaust Manifolds{1059}
1996/04/15 New Valve Cover Gasket Helps Prevent Oil Leaks{1107}
1996/03/19 New Liquid Detector Group Used In Jacket Water Low Level Liquid Detector Group{7421}
1996/03/19 New Fault Code Indicates Caterpillar Communication Link Two Problem{1900}
1996/03/19 New Jacket Water Heater Groups Available{1383}
1996/03/19 Remove Unnecessary Clips{1380}
1996/03/19 Be Sure To Remove Former Clips And Brackets If New Clamp Assembly And Retainer Ring Are Used In Engine Oil Lines Groups{1307}
1996/03/19 New Aftercooler Core Repair Kit Available{1064}
1996/04/15 Repair Kits Available For Prelube Pump Groups{1319}
1996/04/15 Check Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{0706,0774,0782}
1996/05/09 Radiators Made With Improved Brass Composition To Add Strength At Crimp Joint{1353}
1996/05/09 Torque Check Necessary For Front Support Bracket Bolts When Damper And Pulley Are Removed{1153}
1996/05/09 New Stronger Cylinder Head Bolts Used{1100}
1996/05/09 New Components In Camshaft Groups Provide Increased Lubrication To Thrust Washer Assembly{1210}
1996/05/09 Oil Drainback Holes Changed In New Piston Crown{1225}
1996/05/09 New Integral Seal In Water Lines Groups Helps Prevent Coolant Leaks{1380}
1996/05/09 New Extension For Electronic Ignition System (EIS) Transformer Groups{1409}
1996/05/09 New High Temperature Resistant Seal Group And O-Ring Seal Used In Water Pump Groups{1361}
1996/05/09 Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09 New Software For The Customer Communication Module{1926}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.