New Valve Cover Gasket Helps Prevent Oil Leaks{1107}
Usage:
3054 (6FK) Industrial, 3054 (4ZK) Generator Set Engines
Description of Change: A new valve cover gasket is used on these engines. The new valve cover gasket has an improved design that will provide better sealing between the valve cover and the cylinder head. This will help prevent oil leaks in this area.
Adaptable To: The new 126-6671 Valve Cover Gasket is a direct replacement for the 101-3674 Valve Cover Gasket.
Caterpillar Information System:
1996/03/19 New Liquid Detector Group Used In Jacket Water Low Level Liquid Detector Group{7421}
1996/03/19 New Fault Code Indicates Caterpillar Communication Link Two Problem{1900}
1996/03/19 New Jacket Water Heater Groups Available{1383}
1996/03/19 Remove Unnecessary Clips{1380}
1996/03/19 Be Sure To Remove Former Clips And Brackets If New Clamp Assembly And Retainer Ring Are Used In Engine Oil Lines Groups{1307}
1996/03/19 New Aftercooler Core Repair Kit Available{1064}
1996/03/19 Replacement Of Turbocharger Nozzle Ring Bolts{1052}
1996/03/19 New 4C-9528 Tensioning Group Available To Gang Together Four 8T-0895 Hydraulic Cylinder Groups For Tensioning Cylinder Head Studs{0703}
1996/03/19 New Auxiliary Water Lines Group (Fresh Water - Aftercooler) Provides Improved Access For Servicing The Number Six Cylinder{1380,1063}
1996/03/19 New Camshaft Kits Available{1210,1100,1108}
1996/03/19 Troubleshooting Data Sheet For Gas Engines{1000}
1996/03/19 Improved Magneto Group Includes O-Ring Seal Groove On Mounting Face To Help Prevent Oil Leaks{1552}
1996/04/15 New Gasket For Engines With Water Cooled Exhaust Manifolds{1059}
1996/04/15 129-0372 Primary Fuel Filter/Water Separator Assembly{1260,1263}
1996/04/15 New Gasket Kits Available{1052,1059,1063,1100,1150,1201,1216,1304,1361,1378,1380}
1996/04/15 New Stainless Steel Plate Prevents Formation Of Rust Within Air Inlet And Exhaust System{1063}
1996/04/15 Engine Configuration And Monitoring System Parameter Programming At Initial Startup{1900,1901}
1996/04/15 Remanufactured Cylinder Head Groups Available{1100}
1996/04/15 Repair Kits Available For Prelube Pump Groups{1319}
1996/04/15 Check Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{0706,0774,0782}
1996/05/09 Radiators Made With Improved Brass Composition To Add Strength At Crimp Joint{1353}
1996/05/09 Torque Check Necessary For Front Support Bracket Bolts When Damper And Pulley Are Removed{1153}
1996/05/09 New Stronger Cylinder Head Bolts Used{1100}
1996/05/09 New Components In Camshaft Groups Provide Increased Lubrication To Thrust Washer Assembly{1210}