New Gasket Kits Available{1052,1059,1063,1100,1150,1201,1216,1304,1361,1378,1380}
Usage:
G3508 (4WD, 2JF, 9TG),
G3512 (4KC, 5JD, 7NJ),
G3516 (3RC, 8LD, 4EK) Engines
- SUPPLEMENT: 06/01/96
Engine News, April 1996, Page 3, "New Gasket Kits Available"
The chart in the article includes two incorrect part numbers. In the G3512 Engines section, in the "Rear Cover & Housing"column, the second part number down (119-0895) is NOT correct. The correct part number is 119-0835.
In the G3516 Engines section, in the "Oil Pump"column, the eleventh part number down (110-7860) is NOT correct. The correct part number is 118-7860.
--------------- END SUPPLEMENT ---------------
The following chart identifies new gasket kits that are available for these engines.
Caterpillar Information System:
1996/04/15 129-0372 Primary Fuel Filter/Water Separator Assembly{1260,1263}
1996/04/15 New Gasket For Engines With Water Cooled Exhaust Manifolds{1059}
1996/04/15 New Valve Cover Gasket Helps Prevent Oil Leaks{1107}
1996/03/19 New Liquid Detector Group Used In Jacket Water Low Level Liquid Detector Group{7421}
1996/03/19 New Fault Code Indicates Caterpillar Communication Link Two Problem{1900}
1996/03/19 New Jacket Water Heater Groups Available{1383}
1996/03/19 Remove Unnecessary Clips{1380}
1996/03/19 Be Sure To Remove Former Clips And Brackets If New Clamp Assembly And Retainer Ring Are Used In Engine Oil Lines Groups{1307}
1996/03/19 New Aftercooler Core Repair Kit Available{1064}
1996/03/19 Replacement Of Turbocharger Nozzle Ring Bolts{1052}
1996/03/19 New 4C-9528 Tensioning Group Available To Gang Together Four 8T-0895 Hydraulic Cylinder Groups For Tensioning Cylinder Head Studs{0703}
1996/03/19 New Auxiliary Water Lines Group (Fresh Water - Aftercooler) Provides Improved Access For Servicing The Number Six Cylinder{1380,1063}
1996/04/15 New Stainless Steel Plate Prevents Formation Of Rust Within Air Inlet And Exhaust System{1063}
1996/04/15 Engine Configuration And Monitoring System Parameter Programming At Initial Startup{1900,1901}
1996/04/15 Remanufactured Cylinder Head Groups Available{1100}
1996/04/15 Repair Kits Available For Prelube Pump Groups{1319}
1996/04/15 Check Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{0706,0774,0782}
1996/05/09 Radiators Made With Improved Brass Composition To Add Strength At Crimp Joint{1353}
1996/05/09 Torque Check Necessary For Front Support Bracket Bolts When Damper And Pulley Are Removed{1153}
1996/05/09 New Stronger Cylinder Head Bolts Used{1100}
1996/05/09 New Components In Camshaft Groups Provide Increased Lubrication To Thrust Washer Assembly{1210}
1996/05/09 Oil Drainback Holes Changed In New Piston Crown{1225}
1996/05/09 New Integral Seal In Water Lines Groups Helps Prevent Coolant Leaks{1380}
1996/05/09 New Extension For Electronic Ignition System (EIS) Transformer Groups{1409}