1996/03/19 Caterpillar

Be Sure To Remove Former Clips And Brackets If New Clamp Assembly And Retainer Ring Are Used In Engine Oil Lines Groups{1307}

Usage:

G3606 (3XF),
G3608 (4WF),
G3612 (1YG),
G3616 (4CG) Engines

Reference: Engine News, October 1995, Page 6, "Improved Clamp Assemblies Increase Reliability For Oil Cooler Lines And Engine Oil Lines"

Description of Change: A new clamp assembly, retainer ring, and associated hardware are used on each end of the 7W-9424 Tube (A) in the engine oil lines groups used on these engines. The new clamp assemblies provide a more secure grip on the tube and help prevent the tube from vibrating.

Adaptable To: The illustration and Chart A identify the new components in the 106-5652 (G3606 and G3608) and 105-3182 (G3612 and G3616) Engine Oil Lines Groups.

Show/hide table

NOTICE

If the new 126-4493 Clamp Assembly and 126-4229 Retainer Ring are used to replace the former 1W-4152 Retainer and 1W-4153 Retaining Ring, be sure to remove clips and brackets identified in the illustration and Chart B. If these clips and brackets are not removed, they could cause wear on the tubes.

(FRONT VIEW OF ENGINE) Location of components in typical engine oil lines group

Caterpillar Information System:

1996/03/19 New Aftercooler Core Repair Kit Available{1064}

1996/03/19 Replacement Of Turbocharger Nozzle Ring Bolts{1052}

1996/03/19 New 4C-9528 Tensioning Group Available To Gang Together Four 8T-0895 Hydraulic Cylinder Groups For Tensioning Cylinder Head Studs{0703}

1996/03/19 New Auxiliary Water Lines Group (Fresh Water - Aftercooler) Provides Improved Access For Servicing The Number Six Cylinder{1380,1063}

1996/03/19 New Camshaft Kits Available{1210,1100,1108}

1996/03/19 Troubleshooting Data Sheet For Gas Engines{1000}

1996/03/19 Improved Magneto Group Includes O-Ring Seal Groove On Mounting Face To Help Prevent Oil Leaks{1552}

1996/03/19 Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}

1996/03/19 Parts Manual Fuel Filter Lines Group Illustration Corrections{1262}

1996/03/19 Possible Sources of High Crankcase Blowby From Breather Tube{1317}

1996/02/16 New Oil Temperature Regulator Lowers Normal Engine Oil Operating Temperature{1330}

1996/02/16 New Cylinder Liner And Cylinder Liner Sleeve Help Prevent Carbon Buildup Around Piston Top Land{1216}

1996/03/19 Remove Unnecessary Clips{1380}

1996/03/19 New Jacket Water Heater Groups Available{1383}

1996/03/19 New Fault Code Indicates Caterpillar Communication Link Two Problem{1900}

1996/03/19 New Liquid Detector Group Used In Jacket Water Low Level Liquid Detector Group{7421}

1996/04/15 New Valve Cover Gasket Helps Prevent Oil Leaks{1107}

1996/04/15 New Gasket For Engines With Water Cooled Exhaust Manifolds{1059}

1996/04/15 129-0372 Primary Fuel Filter/Water Separator Assembly{1260,1263}

1996/04/15 New Gasket Kits Available{1052,1059,1063,1100,1150,1201,1216,1304,1361,1378,1380}

1996/04/15 New Stainless Steel Plate Prevents Formation Of Rust Within Air Inlet And Exhaust System{1063}

1996/04/15 Engine Configuration And Monitoring System Parameter Programming At Initial Startup{1900,1901}

1996/04/15 Remanufactured Cylinder Head Groups Available{1100}

1996/04/15 Repair Kits Available For Prelube Pump Groups{1319}