1996/03/19 Caterpillar


Troubleshooting Data Sheet For Gas Engines{1000}

Usage:


All Gas Engines

The following Gas Engine Troubleshooting Data Sheet lists the data necessary for troubleshooting a gas engine. Be sure to include the units the measurements were recorded in.

Use the included Data Sheet for all gas engines except G3600 Gas Engines. For G3600 Engines, use the Data Sheets found in the applicable Service Manual, Systems Operation, Testing, And Adjusting Module.

NOTE: It is important to complete as much of the data sheet as possible BEFORE calling a Service Engineer. This will help the Service Engineer assist you better.


Gas Engine Troubleshooting Data Sheet

Caterpillar Information System:

1996/03/19 Improved Magneto Group Includes O-Ring Seal Groove On Mounting Face To Help Prevent Oil Leaks{1552}
1996/03/19 Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/19 Parts Manual Fuel Filter Lines Group Illustration Corrections{1262}
1996/03/19 Possible Sources of High Crankcase Blowby From Breather Tube{1317}
1996/02/16 New Oil Temperature Regulator Lowers Normal Engine Oil Operating Temperature{1330}
1996/02/16 New Cylinder Liner And Cylinder Liner Sleeve Help Prevent Carbon Buildup Around Piston Top Land{1216}
1996/02/16 New Valve Rocker Arm Assembly And Rocker Arm Adjusting Screw Used{1123}
1996/02/16 New Turbocharger Wash Water Lines Groups Used{1052}
1996/02/16 New Drive Gear Used In Auxiliary Pump Group{1206}
1996/02/16 Slip In Coupling Used Instead Of Bellows Assembly In Turbocharger Group To Improve Serviceability{1061,1065}
1996/02/16 Record Turbocharger Serial Number On Warranty Claims{1052}
1996/02/16 Phosphate Coating Added To Camshaft Lobes{1210}
1996/03/19 New Camshaft Kits Available{1210,1100,1108}
1996/03/19 New Auxiliary Water Lines Group (Fresh Water - Aftercooler) Provides Improved Access For Servicing The Number Six Cylinder{1380,1063}
1996/03/19 New 4C-9528 Tensioning Group Available To Gang Together Four 8T-0895 Hydraulic Cylinder Groups For Tensioning Cylinder Head Studs{0703}
1996/03/19 Replacement Of Turbocharger Nozzle Ring Bolts{1052}
1996/03/19 New Aftercooler Core Repair Kit Available{1064}
1996/03/19 Be Sure To Remove Former Clips And Brackets If New Clamp Assembly And Retainer Ring Are Used In Engine Oil Lines Groups{1307}
1996/03/19 Remove Unnecessary Clips{1380}
1996/03/19 New Jacket Water Heater Groups Available{1383}
1996/03/19 New Fault Code Indicates Caterpillar Communication Link Two Problem{1900}
1996/03/19 New Liquid Detector Group Used In Jacket Water Low Level Liquid Detector Group{7421}
1996/04/15 New Valve Cover Gasket Helps Prevent Oil Leaks{1107}
1996/04/15 New Gasket For Engines With Water Cooled Exhaust Manifolds{1059}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.