New Oil Temperature Regulator Lowers Normal Engine Oil Operating Temperature{1330}
Usage:
3600 Family Of Engines
Description of Change: A new oil temperature regulator is being used to lower the normal operating temperature of the engine oil from, 85°C (185°F) to 83°C (181°F). The full open temperature of the new oil temperature regulator will also be lowered by 4°C (39°F). This change will cause the oil temperature regulator to bypass the maximum oil flow to the oil cooler sooner. This will result in a more desirable oil temperature range.
Adaptable To: The new 120-9453 Oil Temperature Regulator is a direct replacement for the 6I-4954 Oil Temperature Regulator.
Caterpillar Information System:
1996/02/16 New Cylinder Liner And Cylinder Liner Sleeve Help Prevent Carbon Buildup Around Piston Top Land{1216}
1996/02/16 New Valve Rocker Arm Assembly And Rocker Arm Adjusting Screw Used{1123}
1996/02/16 New Turbocharger Wash Water Lines Groups Used{1052}
1996/02/16 New Drive Gear Used In Auxiliary Pump Group{1206}
1996/02/16 Slip In Coupling Used Instead Of Bellows Assembly In Turbocharger Group To Improve Serviceability{1061,1065}
1996/02/16 Record Turbocharger Serial Number On Warranty Claims{1052}
1996/02/16 Phosphate Coating Added To Camshaft Lobes{1210}
1996/02/16 New Brackets Help Prevent Damage To Engine Fuel Injection Lines Groups{1252}
1996/02/16 New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/16 Air Filter Indicator No Longer Provided{7452}
1996/02/16 New Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/16 Lubricant Used On Cylinder Head Bolts Changed{1100}
1996/03/19 Possible Sources of High Crankcase Blowby From Breather Tube{1317}
1996/03/19 Parts Manual Fuel Filter Lines Group Illustration Corrections{1262}
1996/03/19 Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/19 Improved Magneto Group Includes O-Ring Seal Groove On Mounting Face To Help Prevent Oil Leaks{1552}
1996/03/19 Troubleshooting Data Sheet For Gas Engines{1000}
1996/03/19 New Camshaft Kits Available{1210,1100,1108}
1996/03/19 New Auxiliary Water Lines Group (Fresh Water - Aftercooler) Provides Improved Access For Servicing The Number Six Cylinder{1380,1063}
1996/03/19 New 4C-9528 Tensioning Group Available To Gang Together Four 8T-0895 Hydraulic Cylinder Groups For Tensioning Cylinder Head Studs{0703}
1996/03/19 Replacement Of Turbocharger Nozzle Ring Bolts{1052}
1996/03/19 New Aftercooler Core Repair Kit Available{1064}
1996/03/19 Be Sure To Remove Former Clips And Brackets If New Clamp Assembly And Retainer Ring Are Used In Engine Oil Lines Groups{1307}
1996/03/19 Remove Unnecessary Clips{1380}