Turbocharger - Remove and Install
- Remove bolts (1).
Show/hide table
Illustration 2 g06354112 - Remove bolts (2).
Show/hide table
Illustration 3 g06354114 - If equipped open lid (3).
Show/hide table
Illustration 4 g06354115 - Reposition hose assembly (4).
Show/hide table
Illustration 5 g06354321 - Remove bolts (5).
- Remove container (6).
Show/hide table
Illustration 6 g06354324 - Remove bolts (7) and panel (8).
Show/hide table
Illustration 7 g06354327 - Remove bolts (9) and panel (10).
Show/hide table
Illustration 8 g06354328 - Remove hose assembly (11) and (12).
Show/hide table
Illustration 9 g06354330 - Remove four nuts (13)
- Remove tube assemblies (14) and the gasket and the O-ring seal.
Show/hide table
Illustration 10 g06354334 - Remove four bolts (15) and gasket (17).
- Remove turbocharger (16).
Show/hide table
| |
| Illustration 1 | g06354109 |
- Install turbocharger (16) in reverse order of removal
- Install new gaskets and O-rings.
Caterpillar Information System:
NEHS0858 - Using the 197-5589 Wheel Stud Remover/Installer {0374, 0599, 0700, 0730, 4210} NEHS0858 - Using the 197-5589 Wheel Stud Remover/Installer {0374, 0599, 0700, 0730, 4210}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Alternator - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Battery - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Joystick Control
New Grommets Improve Support for Travel Lines on Certain 320, 320 GC, and 323 Excavators {5057, 5058} New Grommets Improve Support for Travel Lines on Certain 320, 320 GC, and 323 Excavators {5057, 5058}
Procedure to Install High-Pressure Fuel Pump on Certain 797F Off-Highway Truck Engines {1255, 1256} Procedure to Install High-Pressure Fuel Pump on Certain 797F Off-Highway Truck Engines {1255, 1256}
Reuse and Salvage Guideline for Cracks in Hydraulic Cylinder Rod Assemblies {0599, 0738, 5102, 7562} Reuse and Salvage Guideline for Cracks in Hydraulic Cylinder Rod Assemblies {0599, 0738, 5102, 7562}
A More Reliable Stick Cylinder Group Is Now Used on Certain 390F Excavators {5458} A More Reliable Stick Cylinder Group Is Now Used on Certain 390F Excavators {5458}
Machine Installation Procedure for Certain 390F Excavators {7000, 7960} Machine Installation Procedure for Certain 390F Excavators {7000, 7960}
C9.3B Industrial Engines Fuel Transfer Pump - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Solenoid Valve (Hydraulic Lockout)
Updated Cylinder Block Rear Housing Gasket is Now Used on Certain Cat® Engines {1166} Updated Cylinder Block Rear Housing Gasket is Now Used on Certain Cat® Engines {1166}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606} Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606} A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Engine Control
797F Tier 4 Off-Highway Truck Field Assembly Guards - Install - Front
140 Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Fuel Filter and Base - Remove and Install
Generator Lid May Contact Circuit Breaker on Certain C4.4 Generator Set Engines {4460} Generator Lid May Contact Circuit Breaker on Certain C4.4 Generator Set Engines {4460}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Fan and Fan Drive - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Refrigerant Compressor - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Diagnostic Trouble Codes
Check the Fuel Priming Pump Wiring Harness Connectors On Certain C9.3B Engines {1258, 1408} Check the Fuel Priming Pump Wiring Harness Connectors On Certain C9.3B Engines {1258, 1408}
C9.3B Industrial Engines Turbocharger - Remove