307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Caterpillar


Refrigerant Compressor - Remove and Install

Usage:

308 GG8

Removal procedure

  1. Turn the battery disconnect switch to the OFF position.

  2. Recover the air conditioner refrigerant from the air conditioning system. Refer to Service Manual, SENR5664, " Air conditioning and Heating Systems with R-134a Refrigerant" for the procedure. Refer to Special publication, NEDG5065, " Air Conditioning Tools" for the tools.


    Illustration 1g06354441

  3. Remove bolts (1).


    Illustration 2g06354445

  4. Remove bolts (2).


    Illustration 3g06354446

  5. If equipped open container lid (3).


    Illustration 4g06354448

  6. Reposition hose assembly (4).


    Illustration 5g06354449

  7. Remove bolts (5) and container (6).


    Illustration 6g06354452

  8. Remove bolts (7) and panel (8).


    Illustration 7g06354453

  9. Remove bolts (9) and panel (10).


    Illustration 8g06354454

  10. Disconnect harness assembly (11).


    Illustration 9g06354458

  11. Disconnect harness assembly (12).


    Illustration 10g06354477

  12. Remove bolt (13) and plate (14).

  13. Remove lines (15).


    Illustration 11g06354484

  14. Remove bolts (16) and guard (17).


    Illustration 12g06354490

  15. Rotate bolt (18) to loosen pulley (20) and remove belt (19).


    Illustration 13g06354494

  16. Remove bolts (21) and air conditioning compressor (22).

Installation Procedure

  1. Install air conditioning compressor (22) in reverse order of removal.

Caterpillar Information System:

307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Fan and Fan Drive - Remove and Install
Generator Lid May Contact Circuit Breaker on Certain C4.4 Generator Set Engines {4460} Generator Lid May Contact Circuit Breaker on Certain C4.4 Generator Set Engines {4460}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Fuel Filter and Base - Remove and Install
140 Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Remove and Install
797F Tier 4 Off-Highway Truck Field Assembly Guards - Install - Front
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Engine Control
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606} A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606} Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Turbocharger - Remove and Install
NEHS0858 - Using the 197-5589 Wheel Stud Remover/Installer {0374, 0599, 0700, 0730, 4210} NEHS0858 - Using the 197-5589 Wheel Stud Remover/Installer {0374, 0599, 0700, 0730, 4210}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Alternator - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Battery - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Diagnostic Trouble Codes
Check the Fuel Priming Pump Wiring Harness Connectors On Certain C9.3B Engines {1258, 1408} Check the Fuel Priming Pump Wiring Harness Connectors On Certain C9.3B Engines {1258, 1408}
C9.3B Industrial Engines Turbocharger - Remove
A New Exhaust Gasket is Now Used on Certain 3412 Engines {1059} A New Exhaust Gasket is Now Used on Certain 3412 Engines {1059}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Determining Diagnostic Trouble Codes
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Event Codes
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Refrigerant Condenser - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Hood - Remove and Install
140 Motor Graders Gear Pump
Rework Procedure of the Left Side Travel Motor Drain Hose Connection On Certain Excavators {5057, 5058} Rework Procedure of the Left Side Travel Motor Drain Hose Connection On Certain Excavators {5057, 5058}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Main Control Valve - Remove and Install
The Body Cable Hanger is Improved on Certain 797 Off-Highway Trucks {7250, 7258, 7424} The Body Cable Hanger is Improved on Certain 797 Off-Highway Trucks {7250, 7258, 7424}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.