Battery - Remove and Install
- Turn the battery disconnect switch to the OFF position.
Show/hide table
Illustration 1 g06353986 - Open door (1).
Show/hide table
Illustration 2 g06354016 - Remove cables (2).
- Remove nuts (3).
- Remove retaining bracket (4) and battery (5).
- Install battery (5) in the reverse order of removal.
Caterpillar Information System:
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Joystick Control
New Grommets Improve Support for Travel Lines on Certain 320, 320 GC, and 323 Excavators {5057, 5058} New Grommets Improve Support for Travel Lines on Certain 320, 320 GC, and 323 Excavators {5057, 5058}
Procedure to Install High-Pressure Fuel Pump on Certain 797F Off-Highway Truck Engines {1255, 1256} Procedure to Install High-Pressure Fuel Pump on Certain 797F Off-Highway Truck Engines {1255, 1256}
Reuse and Salvage Guideline for Cracks in Hydraulic Cylinder Rod Assemblies {0599, 0738, 5102, 7562} Reuse and Salvage Guideline for Cracks in Hydraulic Cylinder Rod Assemblies {0599, 0738, 5102, 7562}
A More Reliable Stick Cylinder Group Is Now Used on Certain 390F Excavators {5458} A More Reliable Stick Cylinder Group Is Now Used on Certain 390F Excavators {5458}
Machine Installation Procedure for Certain 390F Excavators {7000, 7960} Machine Installation Procedure for Certain 390F Excavators {7000, 7960}
C9.3B Industrial Engines Fuel Transfer Pump - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Solenoid Valve (Hydraulic Lockout)
Updated Cylinder Block Rear Housing Gasket is Now Used on Certain Cat® Engines {1166} Updated Cylinder Block Rear Housing Gasket is Now Used on Certain Cat® Engines {1166}
Mini Hydraulic Excavator Monitoring System System Schematic
3516C Petroleum Engine Exhaust Outlet Nitrogen Oxide Sensor - Replace
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Accumulator (Pilot)
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Alternator - Remove and Install
NEHS0858 - Using the 197-5589 Wheel Stud Remover/Installer {0374, 0599, 0700, 0730, 4210} NEHS0858 - Using the 197-5589 Wheel Stud Remover/Installer {0374, 0599, 0700, 0730, 4210}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Turbocharger - Remove and Install
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606} Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606} A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Engine Control
797F Tier 4 Off-Highway Truck Field Assembly Guards - Install - Front
140 Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Fuel Filter and Base - Remove and Install
Generator Lid May Contact Circuit Breaker on Certain C4.4 Generator Set Engines {4460} Generator Lid May Contact Circuit Breaker on Certain C4.4 Generator Set Engines {4460}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Fan and Fan Drive - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Refrigerant Compressor - Remove and Install