A More Reliable Stick Cylinder Group Is Now Used on Certain 390F Excavators {5458}
- Excavator
- 390F (S/N: EXB1-104; HJD1-20190; PYE1-10101; TYE1-223; MGF1-10015; HNG1-241; FEH1-20077; HSM1-306; GAY1-20098)
- Mobile Hydraulic Power Unit
- 390F MHPU (S/N: B371-98198; H271-90224)
- OEM Excavator Based Specialty Solution
- 390F OEM (S/N: N641-90200; PT71-102; P4J1-90201)
Description Of Change: A new stick cylinder group is now used on the machines listed above. The new cylinder group is more reliable for internal parts.
Adaptable To: The following parts are adaptable to the machines within the listed serial numbers, and are effective with all machines after the listed serial numbers. Refer to Table 1 for the new and former part numbers.
Show/hide table
Required Parts | ||||
---|---|---|---|---|
Item | Qty | New Part Number | Part Name | Former Part Number(1) |
1 | 1 | Cylinder Gp | ||
2 | 1 | Head | ||
3 | 1 | Bearing - Sleeve | ||
4 | 1 | Ring | ||
5 | 1 | Seal Kit |
Show/hide table
(1) | The former part number listed is for reference only and may differ. |
Show/hide table
Illustration 1 | g06356555 |
(1) |
Show/hide table
Illustration 2 | g06356562 |
(2) (3) (4) |
Caterpillar Information System:
Machine Installation Procedure for Certain 390F Excavators {7000, 7960} Machine Installation Procedure for Certain 390F Excavators {7000, 7960}
C9.3B Industrial Engines Fuel Transfer Pump - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Solenoid Valve (Hydraulic Lockout)
Updated Cylinder Block Rear Housing Gasket is Now Used on Certain Cat® Engines {1166} Updated Cylinder Block Rear Housing Gasket is Now Used on Certain Cat® Engines {1166}
Mini Hydraulic Excavator Monitoring System System Schematic
3516C Petroleum Engine Exhaust Outlet Nitrogen Oxide Sensor - Replace
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Accumulator (Pilot)
C9.3B Industrial Engines Fuel Transfer Pump - Remove
Three60 Precision Controller Gen II Event Codes
Three60 Precision Controller Gen II General Information
C9.3B Industrial Engines Fuel Priming Pump - Install
Bolts May Loosen in the Air Aftercooler Group on Certain 797F and 797F XQ Off-Highway Trucks {1063, 1071} Bolts May Loosen in the Air Aftercooler Group on Certain 797F and 797F XQ Off-Highway Trucks {1063, 1071}
Reuse and Salvage Guideline for Cracks in Hydraulic Cylinder Rod Assemblies {0599, 0738, 5102, 7562} Reuse and Salvage Guideline for Cracks in Hydraulic Cylinder Rod Assemblies {0599, 0738, 5102, 7562}
Procedure to Install High-Pressure Fuel Pump on Certain 797F Off-Highway Truck Engines {1255, 1256} Procedure to Install High-Pressure Fuel Pump on Certain 797F Off-Highway Truck Engines {1255, 1256}
New Grommets Improve Support for Travel Lines on Certain 320, 320 GC, and 323 Excavators {5057, 5058} New Grommets Improve Support for Travel Lines on Certain 320, 320 GC, and 323 Excavators {5057, 5058}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Joystick Control
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Battery - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Alternator - Remove and Install
NEHS0858 - Using the 197-5589 Wheel Stud Remover/Installer {0374, 0599, 0700, 0730, 4210} NEHS0858 - Using the 197-5589 Wheel Stud Remover/Installer {0374, 0599, 0700, 0730, 4210}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Turbocharger - Remove and Install
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606} Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606} A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Engine Control
797F Tier 4 Off-Highway Truck Field Assembly Guards - Install - Front