Fuel Filter and Base - Remove and Install
- Turn the battery disconnect switch to the OFF position.
Show/hide table
Illustration 1 g06354356 - Disconnect harness assembly (1).
Show/hide table
Illustration 2 g06359365 - Disconnect hose assemblies (2). Remove bolts (3), fuel filter (5), and fuel filter base (4).
- Install fuel filter and base (4) in the reverse order of removal.
Caterpillar Information System:
140 Motor Grader Machine Systems Wheel Lean Arm and Axle Bushings - Remove and Install
797F Tier 4 Off-Highway Truck Field Assembly Guards - Install - Front
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Engine Control
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606} A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606} Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Turbocharger - Remove and Install
NEHS0858 - Using the 197-5589 Wheel Stud Remover/Installer {0374, 0599, 0700, 0730, 4210} NEHS0858 - Using the 197-5589 Wheel Stud Remover/Installer {0374, 0599, 0700, 0730, 4210}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Alternator - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Battery - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System Joystick Control
New Grommets Improve Support for Travel Lines on Certain 320, 320 GC, and 323 Excavators {5057, 5058} New Grommets Improve Support for Travel Lines on Certain 320, 320 GC, and 323 Excavators {5057, 5058}
Procedure to Install High-Pressure Fuel Pump on Certain 797F Off-Highway Truck Engines {1255, 1256} Procedure to Install High-Pressure Fuel Pump on Certain 797F Off-Highway Truck Engines {1255, 1256}
Generator Lid May Contact Circuit Breaker on Certain C4.4 Generator Set Engines {4460} Generator Lid May Contact Circuit Breaker on Certain C4.4 Generator Set Engines {4460}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Fan and Fan Drive - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Refrigerant Compressor - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Diagnostic Trouble Codes
Check the Fuel Priming Pump Wiring Harness Connectors On Certain C9.3B Engines {1258, 1408} Check the Fuel Priming Pump Wiring Harness Connectors On Certain C9.3B Engines {1258, 1408}
C9.3B Industrial Engines Turbocharger - Remove
A New Exhaust Gasket is Now Used on Certain 3412 Engines {1059} A New Exhaust Gasket is Now Used on Certain 3412 Engines {1059}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Determining Diagnostic Trouble Codes
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Event Codes
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Refrigerant Condenser - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Hood - Remove and Install
140 Motor Graders Gear Pump