Engine Electronic Control - Remove and Install
拆卸步骤
Show/hide table
注意 |
---|
在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。 有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。 按照当地法规和要求处置所有液体。 |
- 将蓄电池断路开关转到断开位置。
- 卸下螺栓 (1) 和防护罩 (2) 。
Show/hide table
图 1 | g03626338 |
- 断开线束组件 (3) 和 (4) 。 断开软管组件 (5) 和 (6) 。
Show/hide table
图 2 | g03626419 |
- 断开接地母线 (7) 。 拆下双头螺栓 (8) 和发动机控制模块 (9) 。
Show/hide table
图 3 | g03626516 |
安装步骤
- 按与拆卸相反的顺序安装发动机控制模块 (9) 。
- 拧紧线束组件 (3) 至扭矩为 6 ± 1 N·m (53 ± 9 lb in)。
Caterpillar Information System:
390F Excavator C18 Engine Supplement Engine Oil Cooler - Remove and Install
390F Excavator Engine Oil Filter Base - Assemble
390F Excavator Engine Oil Filter Base - Disassemble
C3.4B Engines Solenoid Valve - Test
390F Excavator Engine Oil Filter Base - Remove and Install
2014/03/10 Improved Torque Converter Housings Are Now Used on Certain On-Highway Transmissions, Petroleum Transmissions, and Petroleum Power Train Packages {3105}
C4.4 Engines for Caterpillar Built Machines Gear Group (Front) - Time
G3304B and G3306B Engines Overhaul (Major)
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending System Overview
390F Excavator Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
C3.4B Engines Sensor Signal (Analog, Passive) - Test
C3.4B Engines Sensor Signal (Analog, Active) - Test
UPS 750 Uninterruptible Power Supply Specifications
390F Excavator Air Cleaner - Remove and Install
390F Excavator C18 Engine Supplement Water Temperature Regulator - Remove and Install
CX31 and CX31 HT On-Highway Transmissions Maintenance Interval Schedule
C175-16 Petroleum Generator Set Engines Engine Rating Definitions
CX31 On-Highway Transmission Maintenance Interval Schedule
CX35 On-Highway Transmission Maintenance Interval Schedule
C4.4 Marine Generator Set Sensors and Electrical Connectors
C3.4B Engines Speed/Timing - Test
Autonomous Calibration Procedure for Off-Highway Trucks Equipped with the Command Package {7008, 7605, 79AU} Autonomous Calibration Procedure for Off-Highway Trucks Equipped with the Command Package {7008, 7605, 79AU}
390F Excavator C18 Engine Supplement Turbocharger - Remove and Install
3500 Generator Sets with Dynamic Gas Blending Gas Filter Condensation - Drain