Engine Oil Filter Base - Assemble
组装步骤
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将柱塞 (4) 和弹簧 (1) 安装在机油滤清器底座组件 (5) 中。
Show/hide table
图 1 | g01385576 |
Show/hide table
弹簧压缩零件如果安装不当,会伤害人体。 为避免伤害,遵照出版的装配程序,并穿上保护装备。 |
- 安装新的 O 形密封圈 (2) 和螺塞 (3) 。
End By: 安装发动机机油滤清器底座。
Caterpillar Information System:
390F Excavator Engine Oil Filter Base - Disassemble
C3.4B Engines Solenoid Valve - Test
390F Excavator Engine Oil Filter Base - Remove and Install
2014/03/10 Improved Torque Converter Housings Are Now Used on Certain On-Highway Transmissions, Petroleum Transmissions, and Petroleum Power Train Packages {3105}
C4.4 Engines for Caterpillar Built Machines Gear Group (Front) - Time
G3304B and G3306B Engines Overhaul (Major)
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending System Overview
390F Excavator Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
C3.4B Engines Sensor Signal (Analog, Passive) - Test
C3.4B Engines Sensor Signal (Analog, Active) - Test
C4.4 Marine Generator Set Engine Crankcase Breather - Replace
C4.4 Marine Generator Set Oil Filter Differential Pressure Problem
390F Excavator C18 Engine Supplement Engine Oil Cooler - Remove and Install
390F Excavator Engine Electronic Control - Remove and Install
UPS 750 Uninterruptible Power Supply Specifications
390F Excavator Air Cleaner - Remove and Install
390F Excavator C18 Engine Supplement Water Temperature Regulator - Remove and Install
CX31 and CX31 HT On-Highway Transmissions Maintenance Interval Schedule
C175-16 Petroleum Generator Set Engines Engine Rating Definitions
CX31 On-Highway Transmission Maintenance Interval Schedule
CX35 On-Highway Transmission Maintenance Interval Schedule
C4.4 Marine Generator Set Sensors and Electrical Connectors
C3.4B Engines Speed/Timing - Test
Autonomous Calibration Procedure for Off-Highway Trucks Equipped with the Command Package {7008, 7605, 79AU} Autonomous Calibration Procedure for Off-Highway Trucks Equipped with the Command Package {7008, 7605, 79AU}