Water Temperature Regulator - Remove and Install
拆卸步骤
Show/hide table
| 所需工具 | |||
| 工具 | 零件号 | 零件描述 | 数量 |
| 207-1601 | 橡胶润滑剂 | 1 | |
| B | 221-8647 | 密封件安装工具 | |
- 排放冷却系统。 有关正确的排放和加注步骤，请参阅操作和保养手册, "冷却液 - 更换"。
- 断开软管组件 (1) 。 断开软管 (2) 。
Show/hide table
 | |
| 图 1 | g03627037 |
- 拆下管组件 (3) 。
Show/hide table
 | |
| 图 2 | g03628258 |
- 拆下螺栓 (5) 和夹子。 断开线束组件 (6) 。
- 拆下螺栓 (7) 。 拆下水温调节器壳体 (4) 。
- 拆下螺栓 (8) ，然后拆下壳体 (9) 。
Show/hide table
 | |
| 图 3 | g03628296 |
- 拆下管 (11) ，然后拆下 O 形密封圈 (10) 。
- 拆下并废弃密封件 (13) 。 拆下水温调节器 (12) 。
Show/hide table
 | |
| 图 4 | g03628299 |
- 拆下唇型密封 (14) 。 记下唇形密封的方位，以便于安装。
Show/hide table
 | |
| 图 5 | g03628300 |
安装步骤
- 按与拆卸相反的顺序安装水温调节器 (12) 。
- 将工具 (A) 涂抹到唇形密封 (14) 的密封圈表面上。 使用工具 (B) 安装唇形密封 (14) 。
- 将工具 (A) 涂抹到 O 形密封圈 (10) 和管组件 (3) 上。
Caterpillar Information System:
390F Excavator Air Cleaner - Remove and Install
UPS 750 Uninterruptible Power Supply Specifications
390F Excavator Engine Electronic Control - Remove and Install
390F Excavator C18 Engine Supplement Engine Oil Cooler - Remove and Install
390F Excavator Engine Oil Filter Base - Assemble
390F Excavator Engine Oil Filter Base - Disassemble
C3.4B Engines Solenoid Valve - Test
390F Excavator Engine Oil Filter Base - Remove and Install
2014/03/10 Improved Torque Converter Housings Are Now Used on Certain On-Highway Transmissions, Petroleum Transmissions, and Petroleum Power Train Packages {3105}
C4.4 Engines for Caterpillar Built Machines Gear Group (Front) - Time
G3304B and G3306B Engines Overhaul (Major)
3512C Marine Auxiliary Generator Set Engines with Dynamic Gas Blending System Overview
CX31 and CX31 HT On-Highway Transmissions Maintenance Interval Schedule
C175-16 Petroleum Generator Set Engines Engine Rating Definitions
CX31 On-Highway Transmission Maintenance Interval Schedule
CX35 On-Highway Transmission Maintenance Interval Schedule
C4.4 Marine Generator Set Sensors and Electrical Connectors
C3.4B Engines Speed/Timing - Test
Autonomous Calibration Procedure for Off-Highway Trucks Equipped with the Command Package {7008, 7605, 79AU} Autonomous Calibration Procedure for Off-Highway Trucks Equipped with the Command Package {7008, 7605, 79AU}
390F Excavator C18 Engine Supplement Turbocharger - Remove and Install
3500 Generator Sets with Dynamic Gas Blending Gas Filter Condensation - Drain
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit Manual Hydraulic Valve - Health Check
390F Excavator Water Pump - Remove and Install
374F Excavator Alternate Exit