Marine Transmission Oil Cooler Core - Remove and Install
- Remove hose (4).
- Remove clamps (2) and remove marine transmission oil cooler (1).
- If necessary, remove bracket (3).
Show/hide table
Illustration 1 | g03068116 |
- Install marine transmission oil cooler (1) in the reverse order of removal.
Caterpillar Information System:
2012/06/06 A New Oil Fill Group Is Used on Certain C32 Petroleum Engines {1107}
C175-16 Engine Maintenance Recommendations
2012/06/15 Guidelines For Protecting Alternators Used on Certain Cat® Products {1405}
C18 Marine Engines Engine Oil Cooler - Remove and Install
C175-16 Locomotive Engines Crankshaft Vibration Damper - Inspect - Oil Supplied Damper
C1.5 and C2.2 Engines for Caterpillar Built Machines Electrical System
3500 Generator Set Engines Exhaust Manifold
C1.5 and C2.2 Engines for Caterpillar Built Machines Governor - Adjust
2012/07/13 Removal Kit for MOV / Surge Protector is Now Available for Certain Uninterruptible Power Supplies {4466}
MOV / Surge Protector Removal Procedure for Uninterruptible Power Supply{4466} MOV / Surge Protector Removal Procedure for Uninterruptible Power Supply{4466}
C175-16 Engine Engine Operation
C175-16 Engine Starting the Engine
C18 Marine Engines Water Pump - Remove and Install
C175-16 Engine Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C18 Marine Engines Water Temperature Regulator - Remove and Install - Jacket Water
C18 Marine Engines Water Temperature Regulator - Remove and Install - SCAC
C18 Marine Engines Auxiliary Water Pump - Remove and Install - Sea Water
C18 Marine Engines Auxiliary Water Pump - Remove and Install - Fresh Water
C3.3B and C3.8 Engines for Caterpillar Built Machines Data Link - Test
C18 Marine Engines Heat Exchanger - Remove and Install
C18 Marine Engines Heat Exchanger - Remove and Install - Sea Water
C18 Marine Engines Aftercooler - Remove and Install - Sea Air - Treated Water
3516C Generator Set Engines Fuel Injection Pump
3516C Generator Set Engines Turbocharger Oil Lines