Water Pump - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 207-1600(1) | Rubber Lubricant | - |
207-1601 | Rubber Lubricant | - |
Show/hide table
(1) | For use in EAME |
Start By:
- Remove the expansion tank (jacket water).
- Remove the alternator.
- Remove bolt (2) and bolts (3).
- Remove water pump (1).
Show/hide table
Illustration 2 g03068221 - Remove adapter (4). Discard O-ring seals (5) and (6).
Show/hide table
Illustration 1 | g03068197 |
- Install water pump (1) in the reverse order of removal.
- Use Tooling (A) for the bore receiving O-ring seal (5).
Caterpillar Information System:
C18 Marine Engines Marine Transmission Oil Cooler Core - Remove and Install
2012/06/06 A New Oil Fill Group Is Used on Certain C32 Petroleum Engines {1107}
C175-16 Engine Maintenance Recommendations
2012/06/15 Guidelines For Protecting Alternators Used on Certain Cat® Products {1405}
C18 Marine Engines Engine Oil Cooler - Remove and Install
C175-16 Locomotive Engines Crankshaft Vibration Damper - Inspect - Oil Supplied Damper
C1.5 and C2.2 Engines for Caterpillar Built Machines Electrical System
3500 Generator Set Engines Exhaust Manifold
C1.5 and C2.2 Engines for Caterpillar Built Machines Governor - Adjust
2012/07/13 Removal Kit for MOV / Surge Protector is Now Available for Certain Uninterruptible Power Supplies {4466}
MOV / Surge Protector Removal Procedure for Uninterruptible Power Supply{4466} MOV / Surge Protector Removal Procedure for Uninterruptible Power Supply{4466}
C175-16 Engine Engine Operation
C175-16 Engine Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C18 Marine Engines Water Temperature Regulator - Remove and Install - Jacket Water
C18 Marine Engines Water Temperature Regulator - Remove and Install - SCAC
C18 Marine Engines Auxiliary Water Pump - Remove and Install - Sea Water
C18 Marine Engines Auxiliary Water Pump - Remove and Install - Fresh Water
C3.3B and C3.8 Engines for Caterpillar Built Machines Data Link - Test
C18 Marine Engines Heat Exchanger - Remove and Install
C18 Marine Engines Heat Exchanger - Remove and Install - Sea Water
C18 Marine Engines Aftercooler - Remove and Install - Sea Air - Treated Water
3516C Generator Set Engines Fuel Injection Pump
3516C Generator Set Engines Turbocharger Oil Lines
3500 Generator Set Engines Air Inlet and Exhaust Lines