Water Temperature Regulator - Remove and Install - Jacket Water
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | - | Loctite 540 | - |
| B(1) | - | Krytox LS23 | - |
| Krytox GPL 205 | - | ||
Show/hide table
| (1) | Either Krytox product can be used. |
- Refer to Operation and Maintenance Manual, "Coolant - Change" for the proper draining and filling procedures.
Show/hide table
Illustration 1 g03068235 - Disconnect hose assemblies (1) and remove the adapters.
- Disconnect bonnet (3) and discard the O-ring seal. Use a new O-ring seal for installation.
- Remove water temperature regulator assembly (2).
Show/hide table
Illustration 2 g03068244 - Remove O-ring seals (4) and (6).
- Remove water temperature regulator (5).
Show/hide table
Illustration 3 g03068248 - Remove lip seal (7).
- Install water temperature regulator (5) in the reverse order of removal.
- Lubricate the seal run surface for lip seal (7) with Tooling (A).
- Use Tooling (B) to secure O-ring seals (4) and (6). Use Tooling (B) to secure the O-ring seal for bonnet (3).
Caterpillar Information System:
C175-16 Engine Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
C18 Marine Engines Water Pump - Remove and Install
C18 Marine Engines Marine Transmission Oil Cooler Core - Remove and Install
2012/06/06 A New Oil Fill Group Is Used on Certain C32 Petroleum Engines {1107}
C175-16 Engine Maintenance Recommendations
2012/06/15 Guidelines For Protecting Alternators Used on Certain Cat® Products {1405}
C18 Marine Engines Engine Oil Cooler - Remove and Install
C175-16 Locomotive Engines Crankshaft Vibration Damper - Inspect - Oil Supplied Damper
C1.5 and C2.2 Engines for Caterpillar Built Machines Electrical System
3500 Generator Set Engines Exhaust Manifold
C1.5 and C2.2 Engines for Caterpillar Built Machines Governor - Adjust
2012/07/13 Removal Kit for MOV / Surge Protector is Now Available for Certain Uninterruptible Power Supplies {4466}
C18 Marine Engines Water Temperature Regulator - Remove and Install - SCAC
C18 Marine Engines Auxiliary Water Pump - Remove and Install - Sea Water
C18 Marine Engines Auxiliary Water Pump - Remove and Install - Fresh Water
C3.3B and C3.8 Engines for Caterpillar Built Machines Data Link - Test
C18 Marine Engines Heat Exchanger - Remove and Install
C18 Marine Engines Heat Exchanger - Remove and Install - Sea Water
C18 Marine Engines Aftercooler - Remove and Install - Sea Air - Treated Water
3516C Generator Set Engines Fuel Injection Pump
3516C Generator Set Engines Turbocharger Oil Lines
3500 Generator Set Engines Air Inlet and Exhaust Lines
3500 Generator Set Engines Air Inlet and Exhaust Lines
3516C Generator Set Engines Turbocharger