Air Cleaner - Remove and Install
- Remove air filter change indicator (1). Remove band clamps (3). Disconnect hose (2).
Show/hide table
Illustration 2 g03060056 - Disconnect hose (5).
- Remove four bolts (6) and remove air cleaner (4).
Show/hide table
Illustration 1 | g03060016 |
- Install air cleaner (4) in the reverse order of removal.
- Tighten bolts (6) to a torque of
15 ± 3 N·m (133 ± 27 lb in) . - Tighten air filter change indicator (1) to a torque of
2 ± 0.7 N·m (18 ± 6 lb in) .
- Tighten bolts (6) to a torque of
Caterpillar Information System:
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (Earlier) - Replace
C1.5 and C2.2 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
G3516C and G3516E Gas Engines Cylinder Head
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel System
3500 Marine Engines Camshaft Bearing Position
3500 Industrial Engines Aftercooler
C3.3B and C3.8 Engines for Caterpillar Built Machines Coolant Level Is Low
C3.3B and C3.8 Engines for Caterpillar Built Machines Coolant Contains Oil
C3.3B and C3.8 Engines for Caterpillar Built Machines Acceleration Is Poor or Throttle Response Is Poor
C3.3B and C3.8 Engines for Caterpillar Built Machines Electronic Service Tools
C3.3B and C3.8 Engines for Caterpillar Built Machines Test ECM Mode
C3.3B and C3.8 Engines for Caterpillar Built Machines ECM - Replace
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Serial Number Plate
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel System - Inspect
C1.5 and C2.2 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
C18 Marine Engines Exhaust Manifold - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Electronic Control System Components
2013/03/15 New Jacket Water Heater System Components Are Used on Certain C27, C32, 3500, and C175 Generator Set Engines {1383}
C18 Marine Engines Fuel Cooler - Remove and Install
C18 Marine Engines Air Starting Motor - Remove and Install
Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765} Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765}
3500 Marine Engines Camshaft Bearing Position
C3.3B and C3.8 Engines for Caterpillar Built Machines Cooling Fan Is Always ON