Camshaft Bearing Position
Show/hide table
| |
| Illustration 1 | g03061837 |
Show/hide table
| Specification for 240-6652 Cylinder Block Gp, 383-2090 Cylinder Block Gp(1), and 383-7226 Cylinder Block Gp | |||
|---|---|---|---|
| Item | Qty | Part | Specification Description |
| The camshaft bearings from the front surface of the cylinder block are the following dimensions: | |||
| The oil holes must be aligned at the correct angle when the bearings are installed. Refer to Specifications, "Cylinder Block" for the correct angle. | |||
| A | - | - | Distance from front face of cylinder block is |
| B | - | - | Distance from front face of cylinder block is |
| C | - | - | Distance from front face of cylinder block is |
| D | - | - | Distance from front face of cylinder block is |
| E | - | - | Distance from front face of cylinder block is |
| F | - | - | Distance from front face of cylinder block is |
| G | - | - | Distance from front face of cylinder block is |
| H | - | - | Distance from front face of cylinder block is |
| J | - | - | Distance from front face of cylinder block is |
Show/hide table
| (1) | Callout (A) and callout (B) not applicable for 12 cylinder engine. |
Caterpillar Information System:
Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765} Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765}
C18 Marine Engines Air Starting Motor - Remove and Install
C18 Marine Engines Fuel Cooler - Remove and Install
2013/03/15 New Jacket Water Heater System Components Are Used on Certain C27, C32, 3500, and C175 Generator Set Engines {1383}
C1.5 and C2.2 Engines for Caterpillar Built Machines Electronic Control System Components
C18 Marine Engines Exhaust Manifold - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel System - Inspect
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Serial Number Plate
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
C18 Marine Engines Air Cleaner - Remove and Install
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (Earlier) - Replace
C3.3B and C3.8 Engines for Caterpillar Built Machines Cooling Fan Is Always ON
C3.3B and C3.8 Engines for Caterpillar Built Machines Engine Shutdown Occurs Intermittently
C3.3B and C3.8 Engines for Caterpillar Built Machines Fuel Consumption Is Excessive
C18 Marine Engines Atmospheric Pressure Sensor - Remove and Install
C18 Marine Engines Camshaft Position Sensor - Remove and Install
C18 Marine Engines Crankshaft Position Sensor - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Oil Consumption Is Excessive
C18 Marine Engines Coolant Level Sensor - Remove and Install - Jacket Water
C18 Marine Engines Coolant Level Sensor - Remove and Install - SCAC
C18 Marine Engines Coolant Temperature Sensor - Remove and Install - Jacket Water
C18 Marine Engines Engine Oil Pressure Sensor - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Oil Contains Coolant