Coolant Level Sensor - Remove and Install - Jacket Water
- Disconnect harness assembly (2). Remove coolant level sensor (1).
Show/hide table
Illustration 1 | g03062716 |
- Install coolant level sensor (1) in the reverse order of removal.
- Tighten coolant level sensor (1) to a torque of
20 ± 3 N·m (177 ± 27 lb in) .
- Tighten coolant level sensor (1) to a torque of
Caterpillar Information System:
C3.3B and C3.8 Engines for Caterpillar Built Machines Oil Consumption Is Excessive
C18 Marine Engines Crankshaft Position Sensor - Remove and Install
C18 Marine Engines Camshaft Position Sensor - Remove and Install
C18 Marine Engines Atmospheric Pressure Sensor - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Fuel Consumption Is Excessive
C3.3B and C3.8 Engines for Caterpillar Built Machines Engine Shutdown Occurs Intermittently
C3.3B and C3.8 Engines for Caterpillar Built Machines Cooling Fan Is Always ON
3500 Marine Engines Camshaft Bearing Position
Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765} Torque Multipliers, Models 1U-7293, 6V-7820 and 6V-6080{0599, 0765}
C18 Marine Engines Air Starting Motor - Remove and Install
C18 Marine Engines Fuel Cooler - Remove and Install
2013/03/15 New Jacket Water Heater System Components Are Used on Certain C27, C32, 3500, and C175 Generator Set Engines {1383}
C18 Marine Engines Coolant Level Sensor - Remove and Install - SCAC
C18 Marine Engines Coolant Temperature Sensor - Remove and Install - Jacket Water
C18 Marine Engines Engine Oil Pressure Sensor - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Oil Contains Coolant
C18 Marine Engines Engine Oil Temperature Sensor - Remove and Install
C18 Marine Engines Fuel Pressure Sensor - Remove and Install
C18 Marine Engines Fuel Temperature Sensor - Remove and Install
C18 Marine Engines Inlet Air Temperature Sensor - Remove and Install
C18 Marine Engines Electronic Control Module - Remove and Install
C3.3B and C3.8 Engines for Caterpillar Built Machines Oil Contains Fuel
C3.3B and C3.8 Engines for Caterpillar Built Machines Valve Lash Is Excessive
C280-12 and C280–16 Marine Engines Exhaust Manifold Shield - Remove and Install