Aftercooler
Show/hide table
| |
| Illustration 1 | g03059617 |
Show/hide table
| Specification for 8N-0358 Water Aftercooler Gp and 380-1710 Water Aftercooler Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 60 | 0L-1143 Bolt | Torque to |
| 2 | 2 | 7M-9909 O-Ring Seal | Before assembly, lubricate the bore lightly with glycerin. |
| 3 | 10 | 6V-1454 O-Ring Seal | Before assembly, lubricate the bore lightly with glycerin. |
| 4 | - | - | Apply Loctite RTV Silicone Clear to the mating surfaces of the housing. |
| 5 | 30 | 031-4630 Locking Bolt | Torque to |
| 6 | 4 | 8C-5209 O-Ring Seal | Before assembly, lubricate the bore lightly with glycerin. |
| 7 | 4 | 1T-0720 Bolt | Torque to |
Caterpillar Information System:
C3.3B and C3.8 Engines for Caterpillar Built Machines Coolant Level Is Low
C3.3B and C3.8 Engines for Caterpillar Built Machines Coolant Contains Oil
C3.3B and C3.8 Engines for Caterpillar Built Machines Acceleration Is Poor or Throttle Response Is Poor
C3.3B and C3.8 Engines for Caterpillar Built Machines Electronic Service Tools
C3.3B and C3.8 Engines for Caterpillar Built Machines Test ECM Mode
C3.3B and C3.8 Engines for Caterpillar Built Machines ECM - Replace
C3.3B and C3.8 Engines for Caterpillar Built Machines ECM Software - Install
2012/09/11 Improved VisionLinkTM Software Is Now Available for Certain Caterpillar Machines {7601}
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel System - Prime
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Head - Inspect
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
G3500B Engines Gear Group (Front)
3500 Marine Engines Camshaft Bearing Position
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel System
G3516C and G3516E Gas Engines Cylinder Head
C1.5 and C2.2 Engines for Caterpillar Built Machines Glossary of Electronic Control Terms
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (Earlier) - Replace
C18 Marine Engines Air Cleaner - Remove and Install
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Serial Number Plate
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel System - Inspect
C1.5 and C2.2 Engines for Caterpillar Built Machines Air Inlet and Exhaust System
C18 Marine Engines Exhaust Manifold - Remove and Install
C1.5 and C2.2 Engines for Caterpillar Built Machines Electronic Control System Components