Gear Group (Front)
Show/hide table
| |
| Illustration 1 | g03058156 |
|
Front view of engine | |
Show/hide table
| Specification for 278-1348 Front Gear Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 1 | 7N-5245 Pump Adapter | After installation, bore of 127-5400 Bushing is |
| 2 | 1 | 155-2307 Idler Gear As | After installation, bore of 116-1365 Bearing is Installation depth is |
| 3 | 1 | 151-0149 Idler Shaft | Diameter is |
| 4 | 2 | 259-4598 O-Ring Seal | Before assembly, lightly lubricate the bores with the lubricant that is being sealed. |
| 5 | 1 | 7N-5239 Pump Drive Shaft As | Diameter is Install the 8T-2153 Socket Setscrew to the bottom of the threaded hole and tighten to |
| 6 | 1 | 235-3546 O-Ring Seal | Before assembly, lightly lubricate the bores with the lubricant that is being sealed. |
| 7 | 2 | 7N-5246 Thrust Washer | Thickness is Width of groove in new pump drive shaft assembly (8) is End play for the pump drive shaft assembly is |
| 9 | 1 | 279-3342 Pump Adapter | After installation, bore of 127-5400 Bushing is During assembly, flush the bushing with the pump adapter surface. Oil hole in the bushing must be aligned with the hole in the bore. |
Caterpillar Information System:
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Timing - Check
C1.5 and C2.2 Engines for Caterpillar Built Machines Basic Engine
C1.5 and C2.2 Engines for Caterpillar Built Machines Cooling System
C1.5 and C2.2 Engines for Caterpillar Built Machines General Information
G3516C and G3516E Gas Engines Engine Oil Filter
3500B Locomotive Engines Auxiliary Drive (Lower Left Hand)
G3516C and G3516E Gas Engines Water Lines
LEM Failures On UPSB505 Uninterruptible Power Supply{4480} LEM Failures On UPSB505 Uninterruptible Power Supply{4480}
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Bearing (3.5 EVD or Greater) - Replace
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Bearing (Earlier) - Replace
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Maintenance Interval Schedule
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Head - Inspect
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel System - Prime
2012/09/11 Improved VisionLinkTM Software Is Now Available for Certain Caterpillar Machines {7601}
C3.3B and C3.8 Engines for Caterpillar Built Machines ECM Software - Install
C3.3B and C3.8 Engines for Caterpillar Built Machines ECM - Replace
C3.3B and C3.8 Engines for Caterpillar Built Machines Test ECM Mode
C3.3B and C3.8 Engines for Caterpillar Built Machines Electronic Service Tools
C3.3B and C3.8 Engines for Caterpillar Built Machines Acceleration Is Poor or Throttle Response Is Poor
C3.3B and C3.8 Engines for Caterpillar Built Machines Coolant Contains Oil
C3.3B and C3.8 Engines for Caterpillar Built Machines Coolant Level Is Low
3500 Industrial Engines Aftercooler