G3516C and G3516E Gas Engines Caterpillar


Water Lines

Usage:

G3516C F6D


Illustration 1g03057878
Top view of engine

Table 1
Specification for 210-6273 Water Lines Gp 
Item  Qty  Part  Specification Description 
8T-1919 O-Ring Seal  Before assembly, lubricate the bore lightly with 5P-3975 Rubber Lubricant. 
9S-9635 Tube Joint  Tighten the nuts of the tube joint to 12.0 ± 0.5 N·m (106.2 ± 4.4 lb in)


Illustration 2g03057879
Left side view of engine

Table 2
Item  Qty  Part  Specification Description 
216-2285 Tube Joint  Tighten the nuts of the tube joint to 12.0 ± 0.5 N·m (106.2 ± 4.4 lb in)

Caterpillar Information System:

LEM Failures On UPSB505 Uninterruptible Power Supply{4480} LEM Failures On UPSB505 Uninterruptible Power Supply{4480}
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Bearing (3.5 EVD or Greater) - Replace
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Bearing (Earlier) - Replace
UPS 1000S and UPS 1200S Uninterruptible Power Supplys , Parallel Maintenance Interval Schedule
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (3.5 EVD or Greater) - Replace
UPS 120, UPS 150, UPS 250 and UPS 300 Uninterruptible Power Supplies Bearing (Earlier) - Replace
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Bearing (3.5 EVD or Greater) - Replace
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Bearing (Earlier) - Replace
C7.1-XQ200 Rental Generator Set Diesel Particulate Filter Regeneration
C18 Marine Engines Fuel Filter Base - Remove and Install
C7.1 Industrial Engine Sensors and Electrical Components
C18 Marine Engines Fuel Priming Pump - Remove and Install
3500B Locomotive Engines Auxiliary Drive (Lower Left Hand)
G3516C and G3516E Gas Engines Engine Oil Filter
C1.5 and C2.2 Engines for Caterpillar Built Machines General Information
C1.5 and C2.2 Engines for Caterpillar Built Machines Cooling System
C1.5 and C2.2 Engines for Caterpillar Built Machines Basic Engine
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel Injection Timing - Check
G3500B Engines Gear Group (Front)
C1.5 and C2.2 Engines for Caterpillar Built Machines Engine Valve Lash - Inspect/Adjust
C1.5 and C2.2 Engines for Caterpillar Built Machines Cylinder Head - Inspect
C1.5 and C2.2 Engines for Caterpillar Built Machines Fuel System - Prime
2012/09/11 Improved VisionLinkTM Software Is Now Available for Certain Caterpillar Machines {7601}
C3.3B and C3.8 Engines for Caterpillar Built Machines ECM Software - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.