Engine Oil Cooler Bypass Valve
Show/hide table
Illustration 1 | g03051118 |
Front view of engine |
Show/hide table
Illustration 2 | g03051119 |
Right side view |
Show/hide table
Specification for 271-3614 Engine Oil Lines Gp | |||
Item | Qty | Part | Specification Description |
1 | 1 | 124-4273 Bypass Valve | Pressure difference for opening the oil cooler bypass valve |
2 | 1 | 2W-1635 Spring | Length under test force is Test force is Free length after test |
3 | 2 | 6V-6609 O-Ring Seal | Before assembly, lubricate the bores lightly with the lubricant that is being sealed. |
Show/hide table
Illustration 3 | g03051120 |
View B-B |
Show/hide table
Item | Qty | Part | Specification Description |
4 | 4 | 237-7623 O-Ring Seal | Before assembly, lubricate the bores lightly with the lubricant that is being sealed. |
Caterpillar Information System:
C18 Marine Engines Housing (Front) - Remove and Install
C18 Marine Engines Gear Group (Front) - Remove and Install
Installation Instruction of Firmware on Network Management Cards{4480, 7620} Installation Instruction of Firmware on Network Management Cards{4480, 7620}
C18 Marine Engines Front Cover - Remove and Install
C18 Marine Engines Crankshaft Front Seal - Remove and Install
C18 Marine Engines Vibration Damper and Pulley - Remove and Install
C18 Marine Engines Flywheel Housing - Remove and Install
C18 Marine Engines Crankshaft Rear Seal - Remove and Install
C18 Marine Engines Flywheel - Remove and Install
3512C and 3516C Marine Engines Electronic Control Module (ECM)
C18 Marine Engines Engine Support (Front) - Remove and Install
C7.1-XQ200 Rental Generator Set Belts - Inspect/Adjust/Replace
3516B Engine for the MT4400D Off-Highway Truck Air Lines - Aftercooler
C7.1 Industrial Engine Air Inlet and Exhaust System - Series Turbochargers
C7.1 Industrial Engine Turbocharger - Inspect - Series Turbochargers
2012/09/13 A New Turbocharger Housing is Used on Certain 3512 Engines {1052, 1065}
C7.1 Industrial Engine Turbocharger - Inspect - Single Turbocharger
C7.1 Industrial Engine Air Inlet and Exhaust System - Single Turbocharger
C7.1 Industrial Engine Fuel Injection
3500B Generator Sets Generator Bearing Temperature - Test/Record
C18 Marine Engines Valve Mechanism Cover - Remove and Install
C7.1 Industrial Engine Electronic Control System
C7.1 Industrial Engine Power Sources
C18 Marine Engines Valve Mechanism Cover Base - Remove and Install