Valve Mechanism Cover - Remove and Install
- Disconnect hose (1).
- Remove bolts (1). Remove valve mechanism cover (2) and discard the seal. Use a new seal for installation.
- Repeat Step 2 for the other valve mechanism covers.
Show/hide table
Illustration 1 | g03051836 |
- Install valve mechanism cover (2) in the reverse order of removal.
- Tighten bolts (1) to a torque of
18 ± 3 N·m (13 ± 2 lb ft) using the sequence illustrated in Illustration 2.
Show/hide tableIllustration 2 g00579295 - Tighten bolts (1) to a torque of
Caterpillar Information System:
3500B Generator Sets Generator Bearing Temperature - Test/Record
C7.1 Industrial Engine Fuel Injection
C7.1 Industrial Engine Air Inlet and Exhaust System - Single Turbocharger
C7.1 Industrial Engine Turbocharger - Inspect - Single Turbocharger
2012/09/13 A New Turbocharger Housing is Used on Certain 3512 Engines {1052, 1065}
C7.1 Industrial Engine Turbocharger - Inspect - Series Turbochargers
C7.1 Industrial Engine Air Inlet and Exhaust System - Series Turbochargers
3516B Engine for the MT4400D Off-Highway Truck Air Lines - Aftercooler
G3516C and G3516E Gas Engines Engine Oil Cooler Bypass Valve
C18 Marine Engines Housing (Front) - Remove and Install
C18 Marine Engines Gear Group (Front) - Remove and Install
Installation Instruction of Firmware on Network Management Cards{4480, 7620} Installation Instruction of Firmware on Network Management Cards{4480, 7620}
C7.1 Industrial Engine Electronic Control System
C7.1 Industrial Engine Power Sources
C18 Marine Engines Valve Mechanism Cover Base - Remove and Install
G3500 Generator Sets Generator Winding - Test
G3306B Generator Sets Generator Winding Insulation - Test
C18 Marine Engines Rocker Arm and Shaft - Remove and Install
3512C HD SR500 Generator Sets Rotating Rectifier - Inspect/Test
Core Plugs in C27 and C32 Remanufactured Long Blocks and Engine Cylinder Heads Can Be Installed At An Improper Depth{1100, 1201} Core Plugs in C27 and C32 Remanufactured Long Blocks and Engine Cylinder Heads Can Be Installed At An Improper Depth{1100, 1201}
C18 Marine Engines Cylinder Head - Remove and Install
G3500 Generator Sets Space Heater - Test
C3.3B and C3.8 Engines for Caterpillar Built Machines Cat ET Service Features - DEF Dosing System Test
2012/08/08 A New Aftercooler Group is Used on Certain C175 Engines {1063}