PMG3516 Power Module Caterpillar


Coolant Temperature Regulator - Replace

Usage:

PMG3516 GJK

Regulator Temperatur Mantel Air



Ilustrasi 1g01848875

Ganti regulator temperatur air (1) sebelum regulator temperatur air rusak. Penggantian ini adalah praktik perawatan pencegahan yang direkomendasikan. Penggantian regulator temperatur air akan mengurangi peluang terjadinya waktu perbaikan yang tidak dijadwalkan.

Regulator temperatur air yang gagal pada posisi tertutup dapat menyebabkan panas lebih yang berlebihan. Panas yang berlebihan dapat mengakibatkan keretakan pada cylinder head atau kemacetan piston.

Regulator temperatur air yang gagal pada posisi terbuka akan menyebabkan temperatur operasi engine menjadi terlalu rendah selama operasi beban sebagian. Temperatur operasi engine yang rendah selama operasi beban sebagian dapat menyebabkan penumpukan karbon yang berlebihan di dalam silinder. Tumpukan karbon yang berlebihan ini dapat mengakibatkan ring piston cepat aus dan keausan liner silinder. Temperatur rendah juga dapat menyebabkan udara lembap terkondensasi dalam oli. Kondensasi ini dapat membentuk asam yang merusak.


PERHATIAN

Kelalaian dalam mengganti regulator temperatur air secara teratur dapat menyebabkan kerusakan engine yang parah.

Jangan sekali-kali mengoperasikan engine tanpa adanya regulator temperatur air.

Apabila regulator temperatur air dipasang secara tidak benar, engine dapat mengalami panas berlebih, yang dapat menyebabkan kerusakan kepala silinder. Pastikan bahwa regulator temperatur air yang baru terpasang pada posisi semula.


Untuk prosedur penggantian regulator temperatur air, lihat Buku Petunjuk Servis modul , "Pembongkaran dan Perakitan". Untuk bantuan, hubungi dealer Cat.

Catatan: Jika hanya regulator temperatur air yang diganti, kuras cairan pendingin dari sistem pendinginan. Hanya kuras ke tingkat di bawah rumah regulator temperatur air.

Regulator Temperatur Sirkuit Aftercooler Terpisah (SCAC, Separate Circuit Aftercooler)



Ilustrasi 2g02915086

Ganti regulator temperatur air (2) sebelum regulator temperatur air rusak. Penggantian ini adalah praktik perawatan pencegahan yang direkomendasikan. Penggantian regulator temperatur air akan mengurangi peluang terjadinya waktu perbaikan yang tidak dijadwalkan.

Regulator temperatur SCAC mempertahankan air yang masuk pada temperatur minimum yang diperlukan.

Fluktuasi temperatur air saluran masuk SCAC akan menyebabkan efek merugikan pada kinerja dan emisi engine.

Untuk prosedur penggantian regulator temperatur air, lihat Buku Petunjuk Servis modul , "Pembongkaran dan Perakitan". Untuk bantuan, hubungi dealer Cat.

Caterpillar Information System:

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706} 169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
NEHS0733: 159-9404 Counterbore Tool Group For C10 through C13 {0705} NEHS0733: 159-9404 Counterbore Tool Group For C10 through C13 {0705}
PMG3516 Power Module Engine Air Cleaner Service Indicator - Inspect
PMG3516 Power Module Fluid Recommendations
PMG3516 Power Module Refill Capacities
PMG3516 Power Module Product Lifting
PMG3516 Power Module Product Description
3512B and 3512C Petroleum Generator Set Engines Crankcase Pressure Is High
C175-16 Marine Propulsion Engines Sensor Signal (Analog, Active) - Test
3500C Marine Engines Engine Oil Lines
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787} 168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057} Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
C175-16 and C175-20 Generator Set Engines Pressure Control Valve - Oil Regulator Valve and Oil Bypass Valve
C7.1 (Mech) Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "A"
C7.1 (Mech) Industrial Engine Alternator - Install
C7.1 (Mech) Industrial Engine Alternator - Remove
C7.1 (Mech) Industrial Engine Camshaft - Remove and Install
C7.1 (Mech) Industrial Engine Camshaft Bearings - Remove and Install
C7.1 (Mech) Industrial Engine Camshaft Gear - Remove and Install
C7.1 (Mech) Industrial Engine Connecting Rod Bearings - Install - Connecting Rods in Position
C7.1 (Mech) Industrial Engine Connecting Rod Bearings - Remove - Connecting Rods in Position
C7.1 (Mech) Industrial Engine Crankcase Breather - Install - Filtered Breather
C7.1 (Mech) Industrial Engine Crankcase Breather - Remove - Filtered Breather
C7.1 (Mech) Industrial Engine Crankcase Breather - Install - Unfiltered Breather
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.