3500C Marine Engines Caterpillar

Engine Oil Lines

Usage:

3512C 2A2

Show/hide table




Illustration 1	g02986419
Front View

Show/hide table

Table 1
Specification for 381-1327 Engine Oil Lines Gp
Item	Qty	Part	Specification Description
1	1	2W-1053 Plug	Torque to 100 ± 15 N·m (74 ± 11 lb ft).
2	1	2W-1969 Bypass Valve	Valve must open with a pressure difference of 180 ± 20 kPa (26 ± 3 psi).
3	1	2W-1635 Spring	Length under test force is 102.0 mm (4.02 inch).
			Test force is 518 ± 26 N (116 ± 6 lb).
			Free length after test is 143.4 mm (5.65 inch).

Show/hide table




Illustration 2	g02986420
Right side view

Show/hide table

Table 2
Specification for 381-1327 Engine Oil Lines Gp
Item	Qty	Part	Specification Description
4	2	7N-7697 Plunger	Valves must start to open at a pressure difference of 130 ± 30 kPa (19 ± 4 psi) .
			Valves must be fully open at a pressure difference of 200 ± 30 kPa (29 ± 4 psi).
5	2	6B-9202 Spring	Length under test force is 68.3 mm (2.69 inch).
			Test force is 84.5 to 99.6 N (19.0 to 22.4 lb).
			Free length after test is 112.7 mm (4.44 inch).

Caterpillar Information System:

168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787} 168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}

Using the 164-2691 Printer Group {0374, 0599, 0684, 5057} Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}

C175-16 Marine Engine Engine Oil and Water Pump Drive

C175-16 Marine Engine Engine Oil Filter Housing

3512B and 3512C Petroleum Generator Set Engines Coolant Temperature Is Low

CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Replace

CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Configure

C175-16 Marine Engine Fuel Priming Pump

3512C and 3516C Marine Auxiliary and Generator Set Engines Rotating Rectifier - Inspect/Test

CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program

C175-16 Generator Set Model View Illustrations

Extra O-ring Required for Water Pump Installation on Certain C15 On-Highway Truck Engines{1355, 1361, 1380, 1393} Extra O-ring Required for Water Pump Installation on Certain C15 On-Highway Truck Engines{1355, 1361, 1380, 1393}

C175-16 Marine Propulsion Engines Sensor Signal (Analog, Active) - Test

3512B and 3512C Petroleum Generator Set Engines Crankcase Pressure Is High

PMG3516 Power Module Product Description

PMG3516 Power Module Product Lifting

PMG3516 Power Module Refill Capacities

PMG3516 Power Module Fluid Recommendations

PMG3516 Power Module Engine Air Cleaner Service Indicator - Inspect

NEHS0733: 159-9404 Counterbore Tool Group For C10 through C13 {0705} NEHS0733: 159-9404 Counterbore Tool Group For C10 through C13 {0705}

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706} 169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}

PMG3516 Power Module Coolant Temperature Regulator - Replace

C175-16 and C175-20 Generator Set Engines Pressure Control Valve - Oil Regulator Valve and Oil Bypass Valve

C7.1 (Mech) Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "A"