Engine Oil and Water Pump Drive
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 1P-0520 | Driver Gp | 1 |
Start By:
- Remove the engine oil pump.
- Remove bolts (1). Remove cover (2).
Show/hide table
Illustration 2 g02411257 - Remove engine oil and water pump drive (3).
Show/hide table
Illustration 3 g02411258 - Remove O-ring seals (4 ) and (5).
Show/hide table
Illustration 4 g02411259 - Use Tooling (A) and a suitable press in order to remove bearing (6) from cover (2).
Show/hide table
| |
| Illustration 1 | g01200542 |
- Use Tooling (A) and a suitable press in order to install bearing (6) into cover (2).
Show/hide table
Illustration 6 g02411258 Note: Check the O-ring seals for wear or for damage. If necessary, replace the O-ring seals.
- Install O-ring seals (5) and (4).
Show/hide table
Illustration 7 g02411257 - Install engine oil and water pump drive (3).
Show/hide table
Illustration 8 g01200542 - Position cover (2). Install bolts (1).
Show/hide table
| |
| Illustration 5 | g02411259 |
End By:
- Install the engine oil pump.
Start By:
- Remove the engine oil and water pump drive.
- Remove bolts (1).
Show/hide table
Illustration 10 g01200684 - Remove spacer (2), gear (3), and pump drive shaft (4).
Show/hide table
| |
| Illustration 9 | g01200678 |
- Position pump drive shaft (4), gear (3), and spacer (2).
Show/hide table
Illustration 12 g01200678 - Install bolts (1).
Show/hide table
| |
| Illustration 11 | g01200684 |
End By:
- Install the engine oil and water pump drive.
Caterpillar Information System:
C175-16 Marine Engine Engine Oil Filter Housing
3512B and 3512C Petroleum Generator Set Engines Coolant Temperature Is Low
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Replace
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Configure
C175-16 Marine Engine Fuel Priming Pump
3512C and 3516C Marine Auxiliary and Generator Set Engines Rotating Rectifier - Inspect/Test
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
C175-16 Generator Set Model View Illustrations
Extra O-ring Required for Water Pump Installation on Certain C15 On-Highway Truck Engines{1355, 1361, 1380, 1393} Extra O-ring Required for Water Pump Installation on Certain C15 On-Highway Truck Engines{1355, 1361, 1380, 1393}
3500C Marine Engines Engine Oil Pan
Utilizing the Electric Power SpecSizer for Proper Generator Set Sizing{1404, 7002} Utilizing the Electric Power SpecSizer for Proper Generator Set Sizing{1404, 7002}
2012/03/19 A New Exhaust Manifold Center Section and Turbocharger Mounting Hardware Are Used on Certain C18 Industrial Engines {1059}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057} Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787} 168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
3500C Marine Engines Engine Oil Lines
C175-16 Marine Propulsion Engines Sensor Signal (Analog, Active) - Test
3512B and 3512C Petroleum Generator Set Engines Crankcase Pressure Is High
PMG3516 Power Module Product Description
PMG3516 Power Module Product Lifting
PMG3516 Power Module Refill Capacities
PMG3516 Power Module Fluid Recommendations
PMG3516 Power Module Engine Air Cleaner Service Indicator - Inspect
NEHS0733: 159-9404 Counterbore Tool Group For C10 through C13 {0705} NEHS0733: 159-9404 Counterbore Tool Group For C10 through C13 {0705}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706} 169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}