Refill Capacities
Lubricant Capacities
The capacity of the engine crankcase includes the capacity of the oil filters that are installed at the factory.
Show/hide table
| Lubrication System Approximate Refill Capacities |
||
|---|---|---|
| Engine | Liters | US Gallons |
| G3516C | 423 | 112 |
Coolant Capacities
To maintain the cooling system, the total cooling system capacity must be determined. The total cooling system capacity will vary between individual installations. The total cooling system capacity equals the capacity of the jacket water circuit plus the aftercooler circuit plus the external system capacity. The external system capacity includes the following components: expansion tank, heat exchanger, radiator and piping. Refer to the specifications that are provided by Caterpillar or by the OEM of the equipment. Record the total cooling system capacity in the following Table:
Show/hide table
| Cooling System Approximate Refill Capacities |
|
| System | G3516C |
| Jacket Water Circuit | 543.2 L (143.5 US gal) |
| SCAC Circuit | 196.8 L (52 US gal) |
| External System | |
| Total Cooling System | |
Caterpillar Information System:
PMG3516 Power Module Product Lifting
PMG3516 Power Module Product Description
3512B and 3512C Petroleum Generator Set Engines Crankcase Pressure Is High
C175-16 Marine Propulsion Engines Sensor Signal (Analog, Active) - Test
3500C Marine Engines Engine Oil Lines
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787} 168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057} Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
C175-16 Marine Engine Engine Oil and Water Pump Drive
C175-16 Marine Engine Engine Oil Filter Housing
3512B and 3512C Petroleum Generator Set Engines Coolant Temperature Is Low
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Replace
CX31-P600-C11I, CX31-P600-C13I, CX31-P600-C15I, CX31-P600-C18I and CX31-P600-C9I Petroleum Power Train Packages and CX31-P600 Petroleum Transmission Power Train Electronic Control System Electronic Control Module (ECM) - Configure
PMG3516 Power Module Fluid Recommendations
PMG3516 Power Module Engine Air Cleaner Service Indicator - Inspect
NEHS0733: 159-9404 Counterbore Tool Group For C10 through C13 {0705} NEHS0733: 159-9404 Counterbore Tool Group For C10 through C13 {0705}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706} 169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
PMG3516 Power Module Coolant Temperature Regulator - Replace
C175-16 and C175-20 Generator Set Engines Pressure Control Valve - Oil Regulator Valve and Oil Bypass Valve
C7.1 (Mech) Industrial Engine Accessory Drive - Remove and Install - Accessory Drive SAE "A"
C7.1 (Mech) Industrial Engine Alternator - Install
C7.1 (Mech) Industrial Engine Alternator - Remove
C7.1 (Mech) Industrial Engine Camshaft - Remove and Install
C7.1 (Mech) Industrial Engine Camshaft Bearings - Remove and Install
C7.1 (Mech) Industrial Engine Camshaft Gear - Remove and Install