C175-16 Marine Engine Caterpillar


Gear Group (Rear)

Usage:

C175-16 M6A

Removal Procedure

Start By:

  1. Remove the flywheel housing.


    Illustration 1g01209637

  1. Remove bolts (1). Remove plate (2). Remove gear (3).


    Illustration 2g01209639

  2. Remove bearing (4).


    Illustration 3g01209641

  3. Remove bolts (5). Remove shaft assembly (6).


    Illustration 4g01209643

  4. Remove bolts (7). Remove gear (8) from the crankshaft.

Installation Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
1P-0520  Driver Gp 


    Illustration 5g01209643

  1. Install gear (8) onto the crankshaft. Install bolts (7).


    Illustration 6g01209641

  2. Install shaft assembly (6). Install bolts (5).


    Illustration 7g01209639

  3. Use Tooling (A) to install bearing (4).


    Illustration 8g01209637

  4. Install gear (3). Install plate (2). Install bolts (1).

End By:

  1. Install the flywheel housing.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.